We are upgrading NDO, from 3.7(x) to 4.2(x) soon. Can you please share any release notes or documentation that lists out any details changes in REST API calls (structures, requests, responses), so we can be prepared?Our python program interacts with...
Forum Posts
Resolved! ACI Endpoint IP list
Hello Cisco Expert team- Looking for your support to find the way to list down all the active endpoint IP address in the a command line. We are in the process of DC migration. Need to know the remaining active endpoint IP address in the fabricregards...
Resolved! Troubleshoot EVPN VxLAN in Multi-site
Hi, I am running the topology below with EVPN/VxLAN Multisite on dcloud. Unfortunatley the two hosts in different sites and different VNI could not ping each other. However same VNI different sites the can ping each other and also different VNI same ...
Hey Guys!nvmThanks!
HiWe are getting around to replacing our ACI switches. These are 1st gen switches and we are replacing them with 3rd gen switches. I've seen and read through the "Upgrading the Switch Hardware" guide at https://www.cisco.com/c/en/us/td/docs/dcn/aci/a...
What would happen if the endpoint host move on the same ACI leaf switch from one port to another since the COOP database at spine did not track the information about the port of the leaf switch from which the EP is learned?
Resolved! ACI secondary DC frabric to shutdown
Hi floks. In some advice please. we running ACI multipod between to Data Centers. we classified these DCs as Primary and Secondary due to legacy setup prior to going into ACI deployment. The ACI deployment is in Network Centric. we have APIC 2xAPIC i...
Hi all,Does someone have a step-by-step guide related to Okta integration with Cisco APIC?I'm interested in the okta side. I've setup a free okta account for testing but I can't get it working.The authentication is fine (from the okta logs) but I bel...
Hello All, I'm just curious if there's a way to optimize traffic in the below diagram using service graphs. The design does not use service graphs and uses source NAT translation in the ADC so all traffic returns to the ADC. If we create a chained se...
Hello experts,I have a requirement where I need to recable two out of five APICs from one leaf switch pair to another. This is a single pod.Should I decommission the APICs before changing it to a different leaf switch pair and then recommission them ...
Good Day, Anyone can please help to understand how ACI load balancing is done in virtual port-channel? Also if there is vPC between leaf and Firewall, how firewall understands the load balance method from switches (leaf) side? Many Thanks & Regards,
Hello,I'm running a Fabric with 3 APIC, some Leafs Spines and PODs devices.I set a policy to authenticate to the Fabric through Radius, which are running on windows NPS servers.Authentication to APICs succeeds without issues but I cannot authenticate...
Good Day, I need to move my APIC from one Leaf to another leaf, I believe no configuration is required on leaf (fabric Port) except the port should be enabled. Please advice if anything else is required to do the same. Many Thanks in Advance. Regar...
Hi ACI experts , I have a production Fabric ACI that i want to disable that MACsec feature on it ,due of lack of license, I want to know if when i change the MACsec policy to default does this configuration cause an interruption on the whole fabric ...
Maybe somebody know what can be problem? I have special aaep with vlan pool 1-999 (trunk) for FW's it's working very well for 93180-fx3, but when I tried to attach this aaep to 93180-ex I had an error. I could resolve this problem when I made new aae...
