delete
delete
I know Cisco have confirmed IOS and IOS-XE are not vulnerable to Log4J but there is now an increased security concern around anything apache or http related. We have onboarded most of our network switches to DNA Center to take advantage of telemetry ...
Hi, Just about to install Cisco DNA centre and I have a question about ip addressing. Does the cluster link need to be in its own vlan/subnet or can it go in a shared vlan/subnet with other server hosts ? I have seen an example where the cluster has ...
Hi, My First install.*IP addresses are made up. Configured the Management with 10.1.1.1 - eno1Configured the Enterprise with 10.1.2.1 - enp94s0f0Configured the Cluster with with 10.1.3.1 - enp94s0f1 Created Virtual addresses of 10.1.1.2, 10.1.2.2 & ...
I get the following error when trying to add a new IP pool to a VN within Fabric. NCSO20812: One or more of the proposed pool(s) conflicts with at least one blocklisted IP address. Please choose a different pool address. The IP pool subnet used t...
Hello, I've been trying to setup the integration between DNAC and Servicenow, but for some reason the events aren't reaching it. Now I've found a screen on DNAC that displays some sort of error "Invalid Input payload to ITSM. Contact admin". Has any ...
Hi, I am in a lab environment trying to push a QoS policy to two 9300 switches. The switches has a basic config with a mgmt loopback and all port with default configuration. interface GigabitEthernet1/0/16 device-tracking attach-policy IPDT_POLICY !...
Hi Guys if it is possible to rollback a device's release through Cisco DNA Center? For example, I upgraded my switch to a new device and i want to rollback a previous release. Can i use DNA Web gui or I must change with CLI? Thanks all Maurizio
Good Day I am busy implementing DNA Center for a customer, we wanted to make the DNA Center a subCA to be part of the corporate certificate chain but the CA team's are querying the request in terms of how they will know what certificates are being si...
HI, I setup DNAC1.2.3, I had config the "Cluster Virtual IP Address". 10.1.1.240. And the Enterprise 10G Interface set 10.1.1.237. In the beginning, I can connect DNAC Gui from "10.1.1.240" and "10.1.1.237". When DNAC upgrade to 1.2.6, Only can conne...
Hi All,I have recently downloaded the latest image for cisco 9410 switch ,transferred to DNAC image repository.Now I could see the both old and new image in image repository.I have marked new image as Golden and when I have tried to update that image...
Hello everybody. I am using DNA Center Version 2.2.2.5 and on the Assurance page, there is no Network Device detected. although I'm already provision the device and also on Assurance page the Network Devices such as Router and Switch is shown as "No ...
Prior to DNAC 1.3.3.7, switch ports could be changed from DNAC. But 1.3.3.7 is something wrong.I created VLAN1800 and created a template.And there are switches that have not applied the template.I write SSH into this switch. And I added VLAN1800.Then...
I often set it with the CLI. Because I made my own script, it's very easy to manage.And I also like the detection function of DNAC. However, these two functions cannot be compatible.This is because the settings written in the CLI are overwritten by D...
Hi All, I'm hitting a frustrating issue that I cannot find a fix/workaround for. I have configured a Guest SSID in DNA Center using External Webauth. DNAC configures all of the main parameters on the WLC correctly (WLAN, Profile Policy, Webauth Param...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-14-2024 05:18 PM | ||
08-14-2024 02:04 AM | ||
08-14-2024 02:01 AM | ||
08-13-2024 02:42 PM | ||
07-23-2024 05:04 AM |
User | Count |
---|---|
3 | |
2 | |
1 | |
1 | |
1 |