Data Center and Cloud

Additional NIC Card to BE6M-M5-K9

Looking to add an additional NIC Card to the UCS BE6M-M5-K9 server. Has anyone done this that can provide some guidance.

How to downolad Deployed EPG per interface from Leaf switch in APIC

Hi I am using Cisco ACI version 5.3(2c) in my DC infrastructure.I need to compare the list of ‘Deployed EPGs’ on each port of several Leaf switches. I would like to download a list of ‘Deployed EPGs’ from each port of a Leaf switch and compare such a...

Resolved! ACI stretched L3Out: routes readvertised back to core/enterprise

I have an issue where I am receiving a route back from ACI that I have advertised to it. We send only a 0/0 route to ACI via 2 different sets of interfaces (vPCs). We've put both sets of interfaces into the same L3Out with the thought that there is s...

UCSM 4.2 (3j) backup failure on the remote host

We have UCSM 4.2(3j), and backups are failing to a remote Linux box.We have the following error codes in the UCSM

Clarification on "Unicast Routing" Option in ACI Bridge Domain

Hi Cisco Community,I’ve been reviewing the Official Cert Guide (OCG) for ACI and have some questions about the "Unicast Routing" option in Bridge Domains (BDs). Here’s what I’ve understood so far:When "Unicast Routing" is enabled on a BD, the default...

CIMC Upgrade from 2.x version to 4.x version

Hi All,We're trying to upgrade the CIMC of APIC from version 2.x to 4.x of UCS M4 200 Server but facing issue. We tried upgrading using both CLI & GUI but failed both way multiple times.Anyone has any idea about how to resolve this issue.Regards,Vikr...

is ACI vxlan within fabric using flood and learn approach?

Hi, can someone please advise whether vxlan within aci faric is using the approach " Flood & learn"? thanks in advance!

Anyway to configure management IP for ACI switch in CLI, without APIC?

There are some spare switches with OLD ACI image (v14.1). I need to get them upgraded to v16.0 before being compatible with the APIC (v6.0.6c). I know the USB drive approach but it is kinda difficult to access the site...I do have the KVM access to t...

Configure Nexus9000 as a Fusion Router in a SD-Access multisite configuration

In an environment where SD-Access multi-site is configured, each site is used as a relay switch using C9500-32C. Each site uses Inline Tagging to propagate SGTs, and all sites share the same SGT and SGACL control. We are considering replacing the rel...

Resolved! does NDFC have built-in DHCP server for tenant networks (overlay)

Silly question but couldn't seem to find a direct answer. All I could find is that NDFC has internal DHCP server function that serves POAP, but when it comes to tenant networks all appear to be DHCP relay. So can HDFC internal DHCP server support ten...

Resolved! Firmware upgrade from 3.2(3) to 4.1(3m)

I have done all of the system health checks and started the firmware upgrade, but seem to have gotten stuck while doing the fabric update. The web interface is down, but when I cli to fabric a and b, they both show the updated version of 4.1(3m).What...

Resolved! VMM Domain for which networks?

Currently, I have created VMM domains to push port groups create by the APIC and pushed down to the vDS on vCenter (aka VMM) for everything except management. However, I'm building a new site with new protocols like NFS and iSCSI boot which will requ...

route leak vrf to global on NX-9k

now i try leak vrf routes to global int e0/2 its default vrfint vlan 10 It's assigned to vrf 10int vlan 20 It's assigned to vrf 20What should I do?

VPC-NX-9k-VRF-Routing-Vlans-int Vlans

I configure both cores (1 & 2).Create a VRF for each int VLAN.And default route for each vrfBecause router connect to Core1I create on this router two sub-ints, one for vrf DMZAnd another for Inside-ZoneSo the default route for VRF DMZ, inside each c...

Need Help with Cisco C240 M4SX RAID Controller and Fan Issues!

I recently got my hands on a Cisco C240 M4SX with 24 drive bays. It’s equipped with a Cisco 12G SAS Modular RAID Controller, but I’ve run into an issue I can’t seem to solve.From what I’ve read, using a non-Cisco PCIe adapter causes the system fans t...

Data Center and Cloud

Browse the Community

Cisco Developed UCS Integrations

UCS Director