Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,We have problem with registering cisco 6921 phone to CUCM 8.6.We have about 400 phones and most of them are working fine, but some of them not registering.They get ip address from DHCP, I can see phones as CDP neighbors but I cannot reach them....
hi,I bought the following equipment and inserted the ism module in 2911 router. i first reset it and when try to session into it.ISM-SRE-300-K9=Internal Services Module (ISM) with Services Ready Engine1SCUE-ISM-8.6-K9Cisco Unity Express Release 8.61F...
Hello all,Does anyone have a example of a QoS configuration for Catalyst 2960 with lan lite image? RegardsBahlul
I've just applied the latest device pack ( cmterm-devicepack9.1.2.12045 ) to my 9.1 cluster to enable support for the new handsets. Support for the new handsets works fine, except for a trivial issue in CCMAdmin: There are no icons for the new 88xx p...
Hi,I am facing issue with a new DX650 Phone. When I connect the PoE power the Phone does not boot and it doesn't show anything on the display.Attached snapshot of the DX650.Thanks.BRHaris Shuja
Hello. I am going to be deploying CUCME and I have a quick question on functionality. This will be a very simple implementation, no SIP, and all numbers internally will be extensions with no DID's. Century Link will be delivering PSTN services via P...
Hi Guys,I tried to use lync client to call cisco phone, the call flow is Lync----CUCM---xcoder(Cisco GW)---Cisco phone, after media bypass from MS mediation server. The issue is: If I tried to click the "Hold Call" from Lync, it gives me the error th...
We have 20 locations and each one has a local gateway running h323 and POTS lines plugged into them. I would like to send one specific number out the gateway locally at each location (4192671234). I would like the users to be able to dial 741926712...
I already have the CUCM system installed, and I have already added the SIP trunk. I need assistance routing different numbers coming in over this SIP trunk to different partitions. Here is a list of patterns coming into the SIP trunk, along with the ...
Hello everyone,I am trying to configure a basic Auto Attendant using the built-in greeting menu. The issue I am having is that when I get to the greeting menu, I am asked to "dial an extension at any time." When I dial the number, I hear "Sorry, <use...
Dear all, Our customer wants to integrate their Lync 2013 to the Cisco Call Manager 8.5.Out of some not so recent information i thought that if u want to use the enterprise voice of lync you'll have to make a sip trunk between Cisco Call Manager & L...
Hi all,We have CUCM 7 Publisher and 4 CUCM Subscriber in the cluster.The issue is that CUCM Publisher webpage is not displayed, and CUCM Subscriber webpage is working well, I have checked the "tomcat service" found it working fine, also I found that...
Is there a way to accomplish the following requirement in Unity Connection or CUCM? Following is my requirement:Someone calls the extension 5555 during 8 am - 5 pm window, a greeting is played and 2 options are given to the caller.Option 1: Route the...
I have a Hunt Pilot configured to Queue. I have selected a MOH Source and Announcement and for testing, set the maximum numbers of callers in queue to 1. The MOH Audio Source Config is below...Stream # 2MOH Audio Source File SampleAudioSourceInitial ...
I have problems with a headset plantronics HW251N attached to a cisco 7962G, i cant transfer call's when the user answer a call with the headset, i can't transfer the call's, on the phone screen does not appear the option transfer.
