Network Management

HI,In the User "Guide for Device Fault Manager, Software Release 3.2", regarding events it is said that "When the event has been in the Cleared state for 20 minutes, it expires and is removed from the display.", and regarding alarms it is said "Alert...

Anyone have any recommendations regarding tools for composing/editing ACLs?

I have configured transport protocol to use to use telnet and/or ssh for config fetch/archive. I'm seeing thousand of failed ssh connection attempt in the log for several devices that only have telnet enabled. I remeber there were bugs in LMS2.6 (CSC...

Hi,I have a problem with User Tracking. The devices connected on my Catalysts 2924XL (IOS 120-5.WC8) are not discover during major acquisitions. At the first major acquisition (just after a system restoration), it was ok, but during the next acquisit...

2811 is supporting the attached mibs , but i m getting the error as belowThe node is supposed to give response for "bridge MIB table". when we checked the o/p of 'snmpwalk <node> 1.3.6.1.2.1.17' we are getting " dot1dBridge.dot1dBase.dot1dBaseNumPor...

Hello dears all, I have got a CSS 11503 where any commands can be passed as no answer is showed when it arrive.Our experiences tell us that the PCMIA flash has been already broken .How can we see if there is a DISK physically installed ?It seems that...

I have these two issues regarding discovery1. Several devices (cisco 6509) are being discovered via multiple interfaces, loopack, Ethernet0, serial 0/0 etc2. Device has two loopback interfaces and both are being discovered, how do I say to manage onl...

Hi,Is there anyway to disable config archivings for a certain line in theconfiguration. What happens is cisco works looks for config changes and then creates an archive for this. Everytime it checks the ntp clock-period is a different value so than...

Hi All,We are in the process of upgrading from LMS 2.5 (yeah, I know) to 2.6. Is there a standard migration path I should follow? The document I got from the Cisco website does not suggest anything in terms of backup and, more importantly, restore in...

Hi all,I was wondering if anyone knows if DFM 3.2 and RME 4.3.1 are supported in LMS 3.1? The documentation for these applications shows (with LMS 3.2) in the title, so it leads me to think that I need to upgrade to LMS 3.2 in order to obtain suppo...

We are in a buying process of catalyst 4500 to replace the 6006 (endofsupport). We are a broadcast tv station with 400 users unified in the same building accross 4 flors with 35xx switchs linked with fiber (GBIC), step by step we are introducing vide...