Network Management

Hello Experts,I've setup NM-NAM v4.0 on 3845 router. I configured external NAM Management Interface and IP unnumbered Integrated-Service-Module. This setup had been working for about 1 month. Then, there was power shutdown incident. The router was re...

Just about every bit of our LAN/WAN is Cisco, aside from a 5-year old PacketShaper that sits on our primary Internet connection. It's starting to get a little long in the tooth, and we're looking at replacement options.We need something that provide...

Hi,We have a monitoring tool at our host site. We need to be able to monitordevices at a remote site that are not accessible directly from our host site. We have a router at the remote site that is accessible by the host site monitoring tool. The rem...

Hi All, I try to run user tracking report in LMS 3.0. I have specified to use DNS to resolve the hostname in Aquisition setup, but everytime I am running user tracking report (end host), it only shows MAC address of the station and it doesn't show th...

Hi ,I am getting additional port in Chasis view of the device, the port I am getting does not exist at all and the actual ports are also indicating wrong port status but in actual it is different.Pls find the attached screenshot and provide the solut...

Hello,Even though ASA (single context) is supported by LMS 3.0, I am not able to succeed with device credential checking. Device: ASA5540, Version 8.0(3)6The DCR report says 'Device Not Supported'.Please assist.Regards.

Hi,We upgraded DFM to 2.0.13 last week and after completing its weekly rediscovery is now reporting issues with memory on several switches.DFM is reporting that 3 Cisco 2950's have less than 15% CPU memory available. It is also reporting that 2 Cisco...

Hello,My self Dipak, We had 24MB pipe we are daily faced issue related to link utilization, we sniffs the traffic and found that there were more FTP trafficI wants to configure QoS for the same, and I wants to allow only 2mbps for FTP, when link heav...

Is it possible to monitor HP server using Cisco Works ?