Network Management

In RME under Admin>Software Mgmt>View/Edit Preferences there is an option to choos SSH for software image Upgrade. If this is chosen does it mean that RME won't try Telnet for CLI access? Many of my students are hoping that there is a way to allow R...

Hey guys,I'm looking for a little input from those with experience with network closet cooling.We are going to have two classes of IDF's in a new building we're putting up. The first floor closets are going to have two Cisco 3560-48TS switches, one ...

We are planning to install LMS 3.0 on WMware windows 2003 server. Actually, I will have to install the LMS 3.01 after LMS 3.0. Is there any known security issues running on VMware?thx

I inherited a network that has some switches with CDP turned off. These switches attach to routers and are daisy chained on Ethernet ports. It seems like the new discovery features should find these, but I haven't had any luck.I have turned on CDP, I...

Hello,On a lot of our switches we utilize GLBP for load-balance and failover. We use Ciscoworks LMS 2.6 to monitor the network devices. The problem I seem to have is that when we use GLBP Ciscoworks complains that the interface is down and unresponsi...

Hi,We are running LMS 3.0.1.IP Phones are connected to cisco WS-C4510R-E switches. LMS is not able to detect IP Phones.We can able to archive the configuration of these switches from RME, it means that LMS can able to synch with the switches.Pls hel...

Hello all,In cisco view version 6.1.7, if we right click the SFP module HWIC-1GE-SFP to view the sub interface information we are unable to get it.And if we right the interface and select monitor sub interface we are not getting any graphs. For both ...

Hello!I'm using IPM 2.6. Collertors are gathering information continually.Is there the way to generate custom report from database? For instance, i need monthly statistics for rush-hours(or working hours) only, not for 30x24x7 period. Thank you in ad...

Hi,I'm newbie working with CiscoWorks.I have configured some Access Points and i'm receiving a lot of messages saying:InCharge Domain : DFM Clear: Switch FALSE 10.0.0.86 PerformanceException - System is experiencing Port or Interface performance pro...

I have multiple devices cisco in which enable some syslog messages that interest me. In Automatic Actions, I have filters configured for individual messages, some of these filters are working properly but not others despite the messages that arrive c...

Hai,thanks in advance,i hav loaded my 3660 with Ios c3660-ik9s-mz.124-13b and SDM 2.3and configured as belowRouter#sh runBuilding configuration...Current configuration : 2497 bytes!version 12.4service timestamps debug datetime msecservice timestamps ...

Is there a way to configure DFM to not email anything unless the event has been active for X polling cycles or X seconds/minutes? This would be for DFM 2.0.11.