Could anyone please tell me how we can check the status of the health probes defined for the real servers on an ACE blade through snmp please? We loaded following mibs : CiscoSlbMIB (OI .161) , CiscoSlbExtMIB (OI .254) and CiscoSlbHealthMonMIB (OI .5...
Hi!I cannot get LMS 3.0 to find my devices...server 2003 ent nics lan and wan no firewalls etcptmserver.log11/Jan/2008 15:02:04:015 ERROR main com.cisco.nm.xms.ctm.client.CTMCall establishIPC - URN_NOT_FOUND : urn "VPTA" : Not found !!11/Jan/2008 15...
Hi,Is there any way to get the switches/routers hostname in the RME/CS/CM reports. Now I'm getting IP address and hostname field is empty. I'm not using the DNS. I' using LMS 2.5Thanks..
Dear all,In topology services-managed domains-vtp domain.some devices display ip(ip is wrong) the others display hostname,and ip Please see attachment.
hi,I am looking for an snmp mib that I can useto identify the differences between a Cisco 2610 versus a Cisco 2621:10.109.114.44 is Cisco 261010.109.114.2 is cisco 2621.[root@dca2-LinuxES tmp]# /usr/bin/snmpget -v1 -c public 10.109.114.44 .1.3.6.1.4....
If i need to upgrade my LMS 2.5 to a higher vesion, do i need to purchase? what about the updates? I need to resolve the issue of accessing devices using SSH on RME.
Hi all,I recently had to import 1600 devices into LMS2.6 for a new customer. ssh only is allowed. I can ssh fine from the CW server desktop using the supplied credentials. However, the ssh mgt station to device test fails straight away. SNMP is good....
Hi,I'm having some failed entries w/o IP addresses in Archive mgmt.Config Mgmt-Archive Mgmt---Configuration Archival Summary: Successfull: 10Failed:5PartialTotal:15Is there any to way to clear/delete them...Ex:1. (Device Name-Empty here) PRIMARY RUNN...
Hi,I'm using LMS2.5 and CM 4.0.5. The campus manager user acquisition is working fine except for the 2-3 switches. When I do UT End Host Report from device center, it showing zero end hosts. I'm sure that the hosts are connected to these switches and...
Is it possible to have SSH on the device centre window, when accessing devices, or is the fuctionality on intergrated with LMS 2.5. Am only able to access devices on Telnet, for devices on SSH i have to use another application to log into them.
