Network Management

Hi,This is the first time I'm using snmpv3.I have a firewall.Understand that normal snmpv1/2 uses TCP and UDP ports 161 and 162.But snmpv3 also has authentication, usernames etc. So, may I know what are the ports and protocols that I should open on t...

I am trying to do a Ciscoworks 2.6 Statistical history on a Cat 4006 version CatOS 6.4.10 from the Mini-Rmon. But it keeps coming up with this error:I know rmon is enabled, all the snmp are correct as i can access the catalyst via Ciscoworks Please h...

I use ACL Manager (v.1.5 & 1.5). A want to edit access lists on 2811 cisco routers but this device has status unsupported. I have read that ACL Manager has reached end-of-sale or end-of-life status and may no longer be supported. What I can do to use...

Under CM--Home--System Status, I have 33 devices with Data Collection and 59 devices with Device Discovery. What would be the primary cause for this discrepency? All seed devices have been entered and SNMP strings appear to be fine.

What MIB files do I need in order to do basic trap monitoring of an MDS9140?

Hello,I have problem with switches which are configured like cluster.Master's configuration:cluster enable CLUSTER-ABC 0cluster member 1 mac-address 0019.2f7d.5b80Member's configuration:cluster commander-address 0019.2f61.db80 member 1 name CLUSTER-A...

I recently upgraded the IDU to v13.0 as I now have a few 2800's in the network. I also installed the CiscoView package Rtr2800 v7.0 as well. RME is still showing the device as a Generic SNMP device and there is no System View for the 2800 series devi...

HiWhen using the IP Forward MIB, it is only possible to view static route entries in a Cisco 2651xm router but it is not possible to add new static routes or change existing static routes. In our test environment we are using a Cisco 2651 with IOS v...

Hi all,I want to disable receiving SNMP trap status from subinterfaces but still will receive trap from physical interface st. Already entered the command "no snmp trap link-status" but still DFM keep receiving traps. See my configuration below. Any ...

Hi, I get the below mentioned error in the failed devices description after i executed a job through my Netconfig option of Ciscoworks. Can anyone explain the error to me in detail?ERROR:RME_CDL1031:Transport session to device failed TFTP: Failed on...

I have one Ciscoworks that one time ago don?t actualize the inventory. I have put this job manually but I have get the next error RICS0001: Internal Error?I have get in Cisco web the next informationMessage ID Error Message Probable Cause Pos...

hi all,Any web link can teach me by using Cisco ASA with secure ID authenticator for authentication ?

Hi AllNow that I have a traffic history on critical interfaces, and I have seen a spike during the night. Is there a way I can find out what is causing it within the device?