Network Management

In version 2.1 LMS had 2 ways of looking at the connectivity of switches on the network. One was the "Reachability dashboard" and the other I think was " 24 hr availability report". Is there anything similar in version 2.6 ? If I remember correctly e...

Hi I have a problem. Pls give me a solution We have 253 pc having ip 10.0.56.1 to 10.0.56.254 ?.classless ip. Now we got 25 more pc?s and another range of ip with 10.2.115.1 ? 254.(classless)Our agents logged in as power (user name) in enetwork (our...

Does the IOS version 12.1(5)T on Cisco 2610 supports ip tcp intercept.What is the way to get the stable version of IOS for 2610.I have these configs:20480K/4096K bytes of memory32K bytes of non-volatile configuration memory.8192K bytes of processor b...

Hi,i use cpmDS1DS0UsageTable MIB to monitor how many DS0 are used for each DS1.But not all active interface are covered. In specific i have 4 E1 interface (two in VWIC0, one in VWIC1 and one in NM):0/0/00/0/10/1/01/0/0in the snmp walk i can see only ...

A site with 200 subnets has the class B address of 132.45.0.0. The site recently migrated to IPv6 with the subscriber prefix 581E:1456:2314::ABCD/80. Design the subnets and define the subnet addresses, using a subnet identifier of 32 bits.

We are working on plans for upgrades of all of our devices to support IPT. I have gotten an inventory of all our line cards from 2.6, I also need a listing of all our power supplies models as many of them will need to be replaced as well. Can i pull/...

Hi there,I configured a syslog automated action with action type: e-mail (err_disable port). The ciscoworks box is on a secure network, it needs a smtp relay to go outside. The smtp was installed on a win2003 server on the same secure network. The sm...

can you change the authentication protocol on the router to use any other method then PAP to a RADUIS server (ACS)for administration access?

Hi,Customer has LMS 2.5.1 SP4 on Solaris 9 on 2 server running. They work with master/slave for dcr. Now the master server can't purge the config archive anymore. The job failed 16h later, without any details.On the slave server purge achrive job i...

Hi to all,I have some problem with creating IP SLA operations using SNMP.As you know, to create the operation i need to set a rttMonCtrlAdminStatus to CreateAndWait(4) value. It works with devices IOS 12.1(3) but i cant set this value to devices IOS ...

I have 2811 router and LMS 2.6. How come DFM does not see that one fan on router is not working?thanks!

policy drop percentage=100*delta(cbQosCMDropBytes64)/delta(cbQosCMPrePolicyBytes64)whereMIB CISCO-CLASS-BASED-QOS-MIBName cbQosCMDropPkt64 OID 1.3.6.1.4.1.9.9.166.1.15.1.1.14Type CounterUnits Access read-onlyStatus mandatoryThe 64 bits counter...