Hello, I have a scenario where I have to specify a contiguous range of addresses in an ACL, using the least amount of entries possible. Problem is, that these addresses do not fall on any classful boundaries, makingi t hard for me to specify a va...
Hello,has anyone installed the Service Pack 4 for the Campus Manager 4.0 successfuly ?The Ani Server on our Solaris Server is initializing since 24 hours after the installation (daemon restart and even a reboot don't change this situation ). No CM Fe...
I have several stacks of 2950's with a core switch that is a 3550. I want to be able to trace down the switch and port based on IP or MAC address. I can't seem to find a way to do this in the cluster management suite.Thank you
LMS 2.5.1 with Mdf(1.9) installed. What the heck is SharedDcmaIOS. I can find no reference anywhere on ciscc.com.I get the following error when trying to load any of the following packages.Cat1900, Cat2960, Cat4000IOS, CSS11500, MetroSwitch, Rtr800,...
I would like to know what messages will be generated by the commands:CATOS: set snmp trap enable envtempIOS: snmp-server enable traps envmon temperatureWill this generate a syslog message? If yes, what is that message?Will this generate an SNMP trap...
Hi all,I want to learn working mechanism of RSAC. We are using LMS 2.2 RME 3.5 and when syslog messages came a lot other server processes are nearly stopping. So a remote syslog server is a solution or not?RegardsÖZlem
HiOur network is managed by LMS 2.5.1 with the latest version of Campus Manager 4.0.3. Over the last week ANI has crashed three times with the error:Can not connect to server: Exception in connectToAni() . Unable to load properties from server. Plea...
Good day all,I'm evaluating Cisco Access Registrar 4.0 and I'm trying to configure LEAP with authentication to 3rd party radius. I've found some userguides for the product on the Cisco webpage but it doesn't clarify how to configure the setup we have...
Hi,This is our story:We bought the upgrade license from LMS 2.x to 2.5, and we got the license file from cisco by prociding the PAK number. On a fresh server (no LMS 2.2), after installation of Common Services, we started to install RME. At the very ...
Gentlemen,I have a situation on 2 CiscoWorks servers. (LMS 2.5.1 with the latest SP’s on W2k and W2k3) The later is build with a backup from the first2 devices get their community string changed. This causes the devices to become unavailable in campu...
Hi,I have some IP phones on routers 1803 and 1811, but when I add these devices on ITEM 2.0 IDU 6, these routers appears "Unsupported".Thanks for your help.Hernanme.
Is there an easy, non-intrusive way to see if the RME database is loaded with inconsistencies?The Solaris box is running RME 3.5 only with no other CW apps. The reason I ask is the box has been acting kind of weird lately. This morning I had to do ...
