I'm re-installing LMS 2.2 and was wondering if I absolutely had to install in the sequence the notes say to. I don't remember the exact installation sequence.
I have a cisco router Sb 107.I need to do a configuration for a bandwidth priority,can someone help me to give the max priority to the port 80 and 21?Sorry for my english
Hello Guys! I would like to know if there is a tool from cisco to configure Cisco 2821 access-list using Graphics User Interface(GUI)? I'm currently using SDM 2.2a but there is no option to configure the router's access-list using gui. I heard...
Currently, I have LMS 2.2 running on Solaris 8 and LMS2.5 running Windows 2003 on another box. What kind of database is Ciscoworks? What database and configuration files do I need to backup if my system fail and I need to restore the database.thanks
I have RME 3.5 running on Solaris. I want to somehow be notified by email when the Essentials DB can no longer communicate with the RSAC software running on the customers remote syslog server. I'm not sure but I think this is RmeOrb in pdshow. I t...
In cisco works RME 2 of my device configs are not getting archived I get the following error message in RME-->Administration-->config Mgmt-->archive status--failed devices Telnet: PGM_NM=Configuration Archive:6751:TYPE=unassigned message type::Failed...
Hi,I was wondering why some of the links in the layer 2 view of the campus manager Topology Services are Red/I know that the links are up and I cannot see any problems with those links but many of them are in Red???Any thoughts???Apprciate your help....
From the data sheets, CNA seems to support all the modules for the 4000 series, and can see our 4503 switches, but not the 4006. Are the 4006 switches supported in CNA? Both types of switch are running 12.2.20EWA.Thanks in advance
We’ve just installed CiscoWorks LMS 2.5 on a single server. We’re in the process of setting the parameters of each application to get it ready for production. The following message often appears while working in Campus Manager:ERROR (2)X Can not c...
While adding devices to RME 3.5 it shows me devices as not responding. The "Not Responding" show detials gives following reason."Could not commit groups and annotations"I restarted the server and then ADD/IMPORT summary status window show that DIserv...
Dear professionals,I have RME 3.3, and I tried to upgrade cat3500xl and 2900xl and I got this message:Loading image file to flash device : c3500xl-c3h2s-tar.120-5.WC13.tar --> flash:c3500xl-c3h2s- tar.120-5.WC13.tar Running image will be overwrit...
I'm collecting the Syslog messages with Ciscoworks, but on Severity Level 3 I'm receiving lots of messages regarding interface up/down which I don't care.Is there a way to disable that ? without disable all severity level 3? since there are other mes...
We are looking for a way to identify users in our 24 floor building on a 'per floor' basis. Is there a way (keep in mind we use DHCP addressing) to identify ONLY users from a specific floor that are on their edge switch? I have access to some tools t...
