Is there REALLY NO C9300 compatible SFP\SFP+ network module?I've found 10G 4 and 8 ports, Ive found 1G cards, I've found twe cards.... the single card that supports 1G\10G is an RJ45. I NEED a 1G\10G SFP solution on the C9300 platform to complete a s...
Forum Posts
Hello All I have 4 SG500-28 Switches and i want to use Cisco network assistant. Unfortunately when i install CNA 6.1-6.2 or 6.3 i always get the same message that the device is not supported. Currently i am on the latest firmware(updated this mornin...
TEAM , I need help.Hi everyone, the attached diagram is an example of my network setup. I need to configure dhcp snooping and dynamic arp inspection on my layer 3 switch. I have configured the system as seeing below. After my configuration, my client...
Hi All, for a limited timeframe we need to migrate Prime Infrastructure from a Gen2 Appliance to a VM based Deployment. Question is, what Deployment Size fits? For sure, we are safe with PI Professional. Deployment, but the Server must be payed and t...
Needing a little help I have been trying to get this to work for a few weeks now and I was able to get the 2901 to console into devices (Cisco 2900 series switches) with configurations on them. Still, when I try to access a factory defaulted switch I...
Because I had to restore ISE, Restored with include-adeos option. After that, when I try to log in to the CLI, I keep getting a login window and requesting an account. Personally, I don't think it's a restore problem I don't know what the problem is ...
Hi Cisco, having an issue with registering Catalyst 9500 Swtich to a Smart account using CSSM version 6.1.0 using a VRF Management Interface. The communication between CSSM and Catalyst is working fine. I am getting the followin error message: ...
Hi,Please let me know the privilege level that is required to Cisco ASA user to executed this command.show crypto key mypubkey rsashow interface | include up.* +upshow interface ip brief | in __downshow run | include \*show run aaa accountingshow run...
Resolved! DHCP failed. APIPA is being used
Hi everyone,I'm working on an enterprise network project in Packet Tracer and I'm running into an issue with DHCP failing. APIPA is being used on. I've checked another file that works correctly but can't find the difference.I've attached my Packet Tr...
Hello,I have a problem with Assurance Licenses on cisco prime Infrastructure 3.10,all preview tabs on avc template or avc interface configuration are blank,our devices have nbar version 14.0,avc functionality does not work,and our Asr have avc licens...
Hi all, I'm using NWC hardware health script (check_nwc_health) but it's not able to have information about FAN status for a c7200 router; the output of the script for the FAN is: SNMP error the requested table is empty or does not exist. Seems like ...
Somebody know Can I use condition in the compliance with variable? I thought that I can use these rules 1. Find name of the interfaces - command - show lldp neighbors and matches (Gi\d+\/\d+\/\d+|Gi\d+\/\d+|Fa\d+\/\d+) 2. Find SN via command - sho...
Resolved! EEM doesn't work NXOS
Hello everyone, I have the following config and it doesn't seem to work on NXOS, but it works perfectly fine on regular ios.feature sla senderfeature sla responderip sla responderip sla 1000ip sla schedule 1000 life forever start-time nowip sla react...
Hi Team, The subject is related to Prime Infrastructure 3.10.2 in HA deployment, and I'm facing multiple issues: 1- I cannot access cli via SSH, tried TACACS+ user and local users with no luck, also i have noticed from the log it is using SSH via por...
Hi @All ,By using which SNMP OID or MIB file we can monitor the CPU, Memory and other basic metrics of Cisco CBS switches. i have tried using cisco-MIB but no luck, kindly help me out hereThanks in Advance!!
