Network Management

I'm based in Australia and need to supply NTP to global offices in Asia, Europe and USA. We have stratum 1 and stratum 2 servers in Australia and I have a requirement to provide a stratum 2 service into the global sites. I understand how NTP works a...

Hello, I'm trying to retrieve the number of active wireless clients on my WAP 351/371. I have downloaded the WAP351 MIB files from here. I have opened "ciscosbWLANAP.my" According to this file, the needed information should be "apTspecActiveClients"...

I have just started monitoring netflow from Cisco 1900 in PRTG.Here is a sample of the Source/Destination IP's for Top Talkers:1. [208.250.54.122]                        50-77-110-129 2. 157.154.4.10                         50-77-110-1293. static-207...

Today i was trying to configure port forwarding in one of my client's office. They wanted me to forward ports like 5000 and 6000. I was given the GUI access of the cisco router 2900 series. I could not see any options for NAT or ACL there. I doubt we...

We have a RV325 and have turned off remote management, however, when you visit our public IP address from outside the network, the login screen of the router appears.  You cannot actually login because remote management is turned off, but we still do...

i want to send an email on a successful login on a nexus 9k. therfore i have this applet: event manager applet login   event syslog pattern "AUTHPRIV-5-SYSTEM_MSG"   action 1.0 cli show users   action 2.0 cli callhome send eem subject "login" body "$...

Hi folks.. I'll be upfront, I'm not overly familiar with EEM scripting but managed to get IPSLA alerts working on my 3900 series routers. That said, the EEM script I used on the 3900's won't work on my 4451's as it runs IOS XE and does not have the I...

These job aids introduce you to key tools that Cisco© Prime Infrastructure provides to support your client and user monitoring activities on the wired or wireless network, respectively. Review the Wired Clients and Users Monitoring Overview job aid, ...

Hi Everyone,I am trying to create a PAT Pool table for my network on packet tracer.  I am looking to create a static route between the serial links. If possible can you please reply with the needed code to accomplish this, as well as to also switch ...

Hi all, I've a problem with Cisco Network Assistant and Cisco SMB switch SG200-08P. As shown on datasheet, this switch is supported by CNA version 6.1 Switch SG200-08P software version is 1.0.8.3 (in one switch) and 1.0.6.2 (in other 5 switch). CNA ...

Is there a way to export the results of Network Map from Firepower?  I would like to dump the info to Excel, so that I can compare the info against the data from another tool.  Currently, I'm copying this data manually.

The OID I am polling at the moment is cefcModuleOperStatus 1.3.6.1.4.1.9.9.117.1.2.1.1.2. When I poll a Nexus 7k switch I am getting a result: 2,2. I am guessing this means OK and OK. The thing is I don't know what other outputs there are for this OI...