Network Management

Hello, I have upgraded our Cisco Prime Infrastructure from version 2.1 to 2.2.1 (with a backup and restore). We have round about 700 APs and three 5208 Controller. So far everything seems to work really fine. The only problem is that there are no new...

Hi,We have recently setup a couple of reports to show wired device availability. The first month has been fine with top devices showing 100%, however since then we are getting  2267.67 or higher, ones on 10000% If i change from Previous calendar mont...

I need to configure static nat for cisco ASA 5500,here is the topology:one server (source) with ip 10.211.250.22 /28 (interface : name if dmz_virtual_account)will static nat to two destinations :1. to Internet will translated to 202.152.19.196 (Inter...

Hi,Currently i'm using LMS 4.2[compliance report feature]  pulled an PCI DSS report. in the report there 27 kind of rule titles. i needed to update the same to newer version available so all the rule titles are visible in the report. are there any up...

I have an ACS 5.2 in our enclave that I need to authenticate a WS-6500 in our DMZ. It's passing through a McAfee (Sidewinder) S4016 firewall.Has anyone had to create a rule in this firewall to allow AAA access?I managed to get it to pass the log data...

 In my net lan i have a tp-link media converter and not have link with a fiber port Cisco SG500-52P 52-port Gigabit POE Stackable Managed Switch why not support?

Hi all,Im currently setting up 2 ACS appliances using version 5.6. Im trying to join the second instance to the primary instance but I keep on getting the error:"This System Failure occurred:  Connection timed out Unable to register node. Possible ca...

hi all, I have Cisco PI 2.2 and when i go to the clients and users dashboard i found that IP address of some clients and users not appeared and its type is not detected as per attached photo. please advise how can i solve it ? 

Hi, I have Prime 2.2 deployed and working well for our 4500X's and 2960-S's however for a pile of 2960X-24PD-L and 48-FPD-L when we go Configure -> Network Devices -> <switch> and select "Switchports" to make changes for example to the access VLAN of...

When uploading or downloadingpi221_20150131-27.ubfCisco Prime Infrastructure 2.2 - Maintenance Release 1  An error occurred while uploading file:Patch group id pi221_POODLE_20150131_01 of current ubf is already existing in uploaded ubfs. Upload is no...