I have the following EEM config:event manager applet EEM_BGP_DOWN event syslog pattern "%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback100, changed state to down" action 1.0 cli command "enable" action 1.1 cli command "configure term" ac...
here is what i am trying to do. I have a 2900 router with the ucs-e blade in it. I am trying to automate the deployment of hundreds of routers with this setup. So far I have gotten Cisco Prime Infrastructure up and running with the ability to push ...
Hello,I was hoping someone could please help me with an automated script. The logic seems not so difficult although, I do not have much TCL experience...I need a way to load a list of IPs (probably 50 at a time), find their associated MAC address, th...
Hi there, I have installed the UCS Management Pack for SCOM 2012. Objects are being discovered but not all. The Operating Systems and Computers are not discovered. Check attachement for a screenshot.Furthermore I get the following events on every win...
Hello,
I was trying to add a firewall ASA 5545-X with image 9.0.3 to prime infra 2.1 and faced below error message in firewall logs,
incoming SNMP request (584 bytes) from IP address <PI IP ADD> Port 14796 Interface "<int-name>" exceeds data buffer...
Hi all,when i try to login to ciscowork homepage:http://acs01:1741/cwportal/c/portal/loginit diplayed error :HTTP Status 404 - /cwportal/c/portal/logintype Status reportmessage /cwportal/c/portal/logindescription The requested resource (/cwportal/c/p...
Hi,Currently we have installed Cisco PI 1.3 as virtual appliance with evaluation license which is expired. We are planning to upgrade to PI 2.1 but instead of upgrade we are planning to remove old virtual appliance and install new PI 2.1 virtual appl...
I can not get the routing table to show on a 4510. I have attempted to add ip.21, ip.22, and iso to the included views. Still not successful. Any ideasas to what oid's are required to view the routing table via SNMP?
I'm trying to monitor a OSPF neighbor syslog notification event to trigger actions to remove a network statement. I shut down the interface to the monitored neighbor and it removes the network statement which is good. I am also trying to monitor th...
Who can help with this queer ftp transfer problem?After moving from another non-Linux ftp server to vsftp on SLES 11,two out of ten 2950 switches are nearly unable to load configurationfiles from ftp: a file of a few KB will take five minutes to load...
Hello everyone,I have run into a problem with the command "crypto key generate rsa" when sending a config file via tftp from a server to a switch. This seems to have stuck the tftp session as an active session from server to multiple 2960 switch. By ...
Hello,I'm assuming this can work with switches, routers, and controllers. I'm running PI 2.1 and am trying to get the configuration archive functionality working. I have both of these options checked under System Settings > Configuration Archive::: A...
Hello,Does someone have issue with backup NCS via externally mounted location (NFS)?I have Cisco Prime NCS 1.2.0 and tried backup it to external resources, but I have issue with my free space:NCS/admin# backup ncs repository backup_nfs% Creating back...
I am receiving this error when attempting to log on via VPN: "Connection attempt has timed out. Please verify Internet connectivity."I've received this error message while successfully connected to the internet.This is the first time that I've receiv...
Hi there,we want to have an inventory report of your device database.The infrastructure is a wild mix of Catalyst 6500er, 3560X, 3750X, N7K, N5K, WLC, etc. We are using the prime infrastructure 2.1 Report Launch Pad and the API site. The maximum we g...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
.png "Hall of Fame"){kind=icon}