Network Security

Hi, What does SSP(Security Services Processor) do and the significance of the number next to it like in ASA 5585-X SSP-10,20,40,60. Thanks!

hola que tal tengo una duda Habrá manera de poderle generar un usuario que vea todos los comandos menos el config t ? saludos 

Hello Support Community, We have Cisco ASA 5516-X running with FTD. Our ISP provided us a backbone router and range of Public IP address to be able to use in the future for our servers that will be deployed on the DMZ. Our servers on DMZ will be NATe...

i wanna check the malicious file activity on local network (client network) i created file policy with malware cloud lookup (with both direction) and ips policy for outbound communication (including malware rules.....) the access control rule like th...

Добрый день, Куплены такие лицензии:  1. FS-VMW-2-SW-K9 Программный ключ Cisco Firepower Management Center (VMWare) for 2 devices   2.  L-ASA5525-TAMC-1Y Лицензия  Cisco ASA5525 FirePOWER IPS, Apps, AMP and URL  4 шт. Вопрос про обновлении IPS, Apps,...

I changed IP address on an SFR to an available IP address within a remote subnets IP range. The ASA is being shipped to this location where the SFR will communicate to the FMC accorss Lan to Lan Ipsec tunnel. The SFR in question is still here at HQ a...

Hi All, i have tested this on several 2960x with IOS 15.2.2.E5 which is a recommended version of code. when auth fails it does not show the username and it is blank on the logs but when it succeeds it is fine. Has anyone encountered same thing? looks...

we are overhauling our current WAN and have install a 5506-x to connect to our WAN. We are having a problem on the inside interface. We have a Dell N3000 switch which is set as L3 router and it has 4 vlans on it. One for the data network, a voice vla...

eg if i wanted to ensure there was protection on the following CVE-2017-3832 how could i check to ensure that we had protection in place for it? the old ips portal would give the CVE id https://tools.cisco.com/security/center/viewIpsSignature.x?signa...

Question 1. In ASA Firewall with multiple context how can i divert traffic to firepower module and in which context should i put the management port? will it be in admin context or it will be shared in all the contexts?   Question 2. Is OSPF and SLA ...

Please help, For some reason I keep getting denied when configuring port forwarding on an ASA 5510. The current topology is Internet----Modem-----Router--------ASA 5510 (Active/Standby)---------Inside------PHP_TESTIf I am allowing to open a web serve...

Hi CSC, When applying a service-policy within ASA for traffic being sent to the FirePOWER module, should this be applied to all interfaces within a bridge group. See attached picture for example setup which has a Steelhead also. Is there any need to ...