If you have any features/improvement suggestions, let us know below.
If you have any features/improvement suggestions, let us know below.
Hi, Guy I found logs" %PLATFORM-2-MEMORY_ALERT: Memory Status Alert: CRITICAL. Usage 89% of Available Memory" and " %PLATFORM-2-MEMORY_ALERT_RECOVERED: Memory Status Alert: CRITICAL ALERT RECOVERED" Nexus switch model: N3K-C3048TP NXOS version: vers...
NDFC MACSec Support on Fabric Inter Links between to Pods (Easy Fabrics): Freeform Config on Fabric and Interface not working!
Cisco NDFC 12.0.2f: Enable L3 Gateway on Border -> In which cases is this feature necessary, only for L3Out?
Listen: https://smarturl.it/CCRS9E31Follow us: https://twitter.com/CiscoChampion Cisco Nexus Cloud gives customers a new way of deploying, managing, and operating their Cisco Nexus networks from the cloud, providing an option to run their network op...
I've been looking through the API docs and API Configuration guides but haven't found much on what the API call looks like when you import an EPG into a template from an APIC site. I've opened the browser inspect functions to try and capture that cal...
I'm trying to upgrade a cluster of 3 master nodes and 1 standby node from 2.1.2d to 2.2.1h via the gui, and its failing on the install step. The standby node seems to get installed ok but all three master nodes fail. The cluster is only application...
I'm going to replace the FEX attached to N7K. Will N7K FEX config disappear if FEX is removed? I am going to do port-channel shutdown, replace the equipment, and Port-channel up again. What I want to know is that when FEX port-channel is shutdown...
Hello! We have some Nexus 9k and a DCNM, where the Nexus 9k are loaded in an external type Fabric. The Fabric is only used for monitoring the Nexus 9k (read only). Nexus 9k are managed with CLI commands.I need to know if it is possible to manage the ...
Hello's,It's been a while since I've been on the keyboard, and even longer since I've touched a Nexus. Even then, it was nothing in-depth.I have a Nexus with a couple FI6454's attached, then going into the UCS-5108 with multiple blades. There is also...
Hi, I'm designing a solution based on the Nexus Dashboard and the SAN Fabric Controller with SAN Insights to replace a DCNM App Server. I'm trying to find details of the database used, presumably that resides on the Nexus Dashboard vApp VM? I've been...
Hello,I'm just starting out with a single ND node with NDFC 12.0.2f VM running in our lab. Attempting to add C9300-48U (17.3.5) switch to IOS-XE VXLAN Fabric results in switch status "N/A" on the Add Switches screen. C9300 Gi0/0 is vrf forwarding M...
Hello Dears we are trying to install license file on nexus switch using .lic file it's told us this error : System in Smart Licensing Mode. Command not supported while as the vendor told us the device working with traditional license not smart one an...
Hello Dears I am trying to perform vPC configuration with Linux Server but it's still not being up take in mind the the vPC peer link is up and working normally between two switches and here is the configuration for one of them which is identical to ...
I own some Nexus working with RADIUS AuthenticationLooking to have them prompting for a CODE as another authentication factor I am unable to make this to work. Basically I put in the top (to be prefered) of the radius group list, the RADIUS server th...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-07-2024 09:36 AM | ||
07-23-2024 05:26 AM | ||
07-23-2024 01:11 AM | ||
07-18-2024 01:51 PM | ||
07-08-2024 03:04 AM |