If you have any features/improvement suggestions, let us know below.
Forum Posts
Hi All, Anyone had tried Nexus Dashboard 2.2(2d) with Nexus Dashboard Orchestrator 4.0(2i) on DevNet Sandbox and than push configuration such as EPG, BD and VRF from NDO to APIC. I tried and always got error "Template Deployment Failed - code: "182",...
Hi Guys,We have a cluster of Physical ND and we have set up 5.2.4d ACI Simulation and configured with few tenants replicating our Prod environment.We are trying to add ACI Sim fabric to Nexus Dashboard but its not getting discovered. From ND Cli, I c...
i team, i have cisco 9504 nexus switch and i want access the switch gui but i am not able http or https running IOS :: NXOS variable = bootflash:/nxos.9.3.11.bin module :: N9K-C9504 i was trayinh to run comman but not taken ::feature http-server err...
I believe that the error counters shown on Dashboard are cumulative over time, since we're observing lots of counters and it never reduced. We tried to clear the counter locally on ACI leaf switches, the counters on dashboard still showing that old c...
Hi experts, I am trying to deploy an NDI in a vND installed on a hyperflex cluster and seems that I fail miserably. The problem is that I cannot enable the NDI service. This is the setup: vND: 2.2.2dNDI: 6.1.3.943x Data Nodes: with recommended resour...
DCNM 11.4(5)Hello, the DCNM does not send emails after creating reports (monitor / report). On the other hand, e-mails are sent from event setups (Administration / Event Setup / Forwarding) - the configuration is identical to the server properties. I...
Can we implement Spine-Leaf architecture using Nexus N9K-93180YC-FX switches as both Spine and Leaf?And is it possible to have the Spine-Leaf architecture without having ACI, with the switches working on NX-OS mode?
According to the Nexus Dashboard Capacity Planning tool, Insights is not supported on ND v2.3.1...Screenshot below. I can not find further explanation on why OR when will Insights be supported on latest ND...Any suggestion?
Hi all From the documentation "Cisco NDFC Fabric Controller Configuration Guide, Release 12.1.x" it's possible to replace a Switch using the RMA Flow. It is simple if the old and new devices are of the same family with the same number of ports. If ...
Please someone could explain me what are the difference between nexus insight and nexus assurance used in nexus dashboard?
Resolved! NDFC Change Interface Policy
Is there a trick to changing the interface policy from the NDFC? I want to change this from a trunk to an access port. Seems like this should be simple.I am under the interface, but there is no drop-down to change this to an access-port. LAN-->Fabric...
Hi all,I've just had a specific question, "Is Nexus Dashboard FIPS compliant?"I can't find anything in the documentation. Any help and assistance in answering this question would be greatly apprechiated. Thank you.
Hello Dearscould we put multiple interface speed in vPC peer link ? for exmple 10G and 40G interface ?Best Regards
Hi,I activated the Performance Monitoring for my LAN-Classic Fabric to have CPU/Memory/Temp/Interface statistics. For interfaces, I can see TxRx traffics graphs but it's not possible to see graph of Errors... The lightning symbol is clearly visible b...
Here is the link of the tool https://www.cisco.com/c/dam/en/us/td/docs/dcn/tools/nd-sizing/index.html Does not matter if I select the virtual or physical appliances for the Nexus Dashboard in the "Cluster Form Factor" section, I can not seem select b...
