Other Network Architecture Subjects

Hi,I've got this problem two times in two days :on one switch, the links with specific configuration port (i.e 10Mb, full duplex instead of autonegotiate) are lost (the other IP traffic works well).When I try to telnet the switch, it does not works, ...

hello i am new to lan routing. we have two networks. one is for our internal users. and the other one is communicating with other database servers.our lan is connecting it with intranet through a server having win2000 . outside users can access o...

Im new, and need some info. I need the IOS that i can use a DMZ, and what flash 16mb,and memory 48 - 64mb part# is for my 1720, i just the correct part# and IOS # any help would be great thanks

Recently I had a loss of power on my 3500XL switch. After the power was restored I booted the switch back up only to be told that there was a problem with the file system and that there is no file system to boot from. Obviously, I have no switch, an...

I have a router runing both RIP V2and EIGRP routing processes, and redistribute routes from RIP V2 to EIGRP.I have network: 200.200.0.0/16 and 200.200.0.0/24 and 200.200.0.0/30 in RIP V2 table. I would like to redistribute this routes over to EIGRP. ...

Does anyone really know the differences between the 2950 and the 3550's? I really don't see that big of one.

I am in the process of ordering a second full T1. I would like to load balance the traffic on the two wan ports. I also would like to implement some QOS for one of my web sites. We have a 1720 router will this router be able to handle this, or will I...

Please Please Please help. I am pulling my hair out!!!My network configuration is as follows:INTERNET – ROUTER – PIX FIREWALL – ISA SERVER – LANI want to route my SMTP traffic into my exchange server inside my LAN. Please NOTE that all devices are c...

Do you know if it exists a configuration converter from IOS to CatOS (I know the opposite one).Thanks

I have an 3640 router "IOS (tm) 3600 Software (C3640-I-M), Version 12.1(5)T",I use it to interconnect many different other router by using x25 circuit, the problem is when I augment a debit to 2 Mbits the interface is down, but with a 1700 router the...

Can anyone tell me what conditions cause a serial line to report being reset. We have a line problem so I have a good idea of the source of the problem but I am interested in what the interface is missing/receiving to cause this conditionThanksAndy

Dear Sir,What IOS will support the 802.1Q encapsulation on 3745 and 2600 series E1 interfaces? what I found that it only support sde encapsulation?I am running Enterprise plus feature set (C2600-JS-M), Version 12.2(6), on Cisco 2600 series router. At...