Has anyone seen this error on a 3550 switch:Nov 16 18:25:54.765: %SYS-2-MALLOCFAIL: Memory allocation of 1680 bytes failedfrom 0x164AD4, alignment 0Pool: I/O Free: 2172 Cause: Memory fragmentationAlternate Pool: None Free: 0 Cause: No Alternate p...
I have this weird issue on the network where when I ping from router(2924XM IOS 12.2) to the 2900 switch management ip address (IOS 12.1) with 1500 bytes, I am getting timeouts. When I ping across the WAN to the management ip address of the switch it...
On serval switch´s it get a HIGH cpu.See below also i get a lot of these msg´s2004 Nov 24 11:55:29 GMT +01:00 %PAGP-5-PORTFROMSTP:Port 229 left bridge port 2/292004 Nov 24 11:55:33 GMT +01:00 %PAGP-5-PORTFROMSTP:Port 2/31 left bridge port/31194 14326...
Can I install a SIMM MEM3660-2X32FS= (flash memory)in slot 0 (bank 0) of a mainboard (3660 router) or is it only intended for making upgrades..?..I mean, can I install it and make a xmodem to download the IOS on it, or must I add it to an existing co...
I just like to find out what causes the output errors to go up on an Ethernet interface? All other counters are clear and I am just wandering if this causes the FTP to timeout/fail.Thanks in advance.Ethernet0 is up, line protocol is up Hardware is ...
Hello,Hopefully easy question: In RME > Syslog Analysis > any report, the timestamp is one hour behind. My syslog Collector status shows correct time and my CW server machine has correct time. What am I missing?Thanks!!
I recently bought a cisco 831 router for my home LAN.However I cannot get to work with my cable modem, I have tried 2 831 routers but no joy. I know cable modem is working because I am able to use an old broadband router and it works. Please can some...
well, my client's side have a fare number of Cisco devices, there is one NMS machine with both HP OpenView and Cisco RWAN installedabout the IPM usage, let's say i want to monitor a link from Router A S0/2 to Router Z S0/0, when i add the source it i...
Hello!Wondering why ESR routers are not supported by Campus Manager 3.3 even with newest IDU 10? We have few of 10008 routers and cannot show those on any Topology views - only maybe as generic devices with question mark inside. Why "Topology Service...
We are using RightFax and Cisco switches and are unable to fax to any 800 numbers, although we are able to send the fax from regular fax machines. RightFax tells us it's a problem on our end but we cannot find anything. Help! Thanks.
Hi all,our current setup is: 3550 aggregator provides Gbit connections to 4 3548s. We have 15 hubs plugged into switch 4 where all our end users connect to.We have been having some issues where users complain about network slowness when our backups r...
What are the symptoms of mismatched hellos and hold timers? I have a situation where there is a Hub and spoke network (ATM PVCs on hub to FRame PVCs on spokes) where the bandwidth statements are on the spoke but not on the hubs. This is causing the...
Hi,I found this exampe for port mapping. But this was only for one Ip address. I have four would this work ? Also I have a 1712 router not a 827 :Current Configuration:! version 12.1service timestamps debug uptimeservice timestamps log uptime!hostnam...
I have a stack of 3750 Switches uplinks to Cabletron Switch at the other campus. The network is flat and Layer II. CampusA Campus BLAN-------------3750-----------Cabeltron---------LANI want to implement layer 3 access-list o...
