Other Network Architecture Subjects

I have a CW2k server running LMS at work. When it was first installed and patched with the latest IDU's and updates it worked flawlessly. After a period of time (2 weeks or so) connecting to the server began to slow down. Looking at task manager it w...

Hi all, I have cisco 2503 router,which i am not able to boot,even i am not able to enter in rommon mode.I am sending you the msg which im getting at last.pls find in attachement. pls help me in this regards. santosh

Hello,We've a C2503 on which I have set NAT rules as following :...ip nat inside source static tcp 192.168.1.51 21 x.x.x.x 21 extendableip nat inside source static tcp 192.168.1.51 22 x.x.x.x 22 extendableip nat inside source static tcp 192.168.1.51 ...

I have a Cisco 3600 with multiple T1’s and running IOS ver 12.3.4T.My two PRI’s connected to Sprint are setup with primary-5ess and the Telco has them configured as a group. When one fills up with calls the other will accept calls. If I plug in my ...

Can anyone tell me if the 20 device limit on SNMS is set in stone or if it is an advisory limit. ie can I use SNMS to manage 25 device or will it only accept 20 in the database. Thanks

We are looking to classify packets (on CAT 6500s with PFCs in hybrid mode) based on packet size. Is there any way to mark based on packet size?

I'm getting ready to buy a couple of 3750 switches. I have 6 fiber cables that I will be connecting to these switches. Since these switches come with 4 SFP connectors each, all I need to do is just buy the SFP Adapters.My question is, what is the d...

Have a question about where to go find out what the errors and warning mean in the ANIServer.log file. Here are some samples of what I am getting in my log file.2004/04/12 13:01:48 Discovery ani ERROR DcrpSMFPortBPDUGuardDisabled: Unable to get span...

I need to make a pptp tunnel from a cisco router with a Microsoft Server, i've searched the cisco site over and over. Probaly missing something realy simple but i can't seem to find any configuration examples. My setup has to be as follows, clients i...

Hi All, i have installed LMS 2.2. phasing the problemin Campus manager 3.3. i hv GSR,7500,6509 and 3500 series cisco boxes in my network . basically it's service provider network and running MPLS. in topology view i can see the GSR,7513 &...

Hi,I would like to know in which condition I can upgrade the memory of AS5400.If I have 8E1 with basic voice license I have to upgrade this AS5400HPX.Can anyone help me?Thank you very much.Paolo

HI all,Please i need to know, how to see the status of E3 line or port of MGX 8850 and how to test the port with loop test, which commands i can use.Thanks & best Regards

Hi,How do we check the true or real bandwidth being offered by an ISP or a telco company ?Say for example, how could we check the burstable point to point bandwidth of a certain leased line connection ? Is it possible to do this on the router or by j...

Hi.. Im a Mexico's student and I need to pass my test running a Cisco Catalyst 3500 XL. I only have the Cisco Switch and we need to obtain the drivers and manuals anyway and anywhere this is our test.I have got the manual, but I dont know how to co...

It is possible in a Cisco 2620 that nowadays has a wic ISDN to add another wic ISDN, to be able to have two links of 128K. Or it is possible that one of these wics has two ports ISDN. the current version of 2620 is (C2600-D-M), Version 12.2 (6f).Than...