Other Network Architecture Subjects

I have a 6509 cabinet with two 48port POe switches modules in it. My issue is when the power goes out in the building and the cabinet restarts , the modules have to be powered up manually after the cabinet/sup comes up. Is there a cli to autostart th...

I have 3 context on asa. and I cant open ASDM from brauzer. I have asdm.bin on asa. I enable http server. I can connect via ssh with putty. write my host ip address to asa. Please help :(. and sorry for my english

I need to design the network for a campus having around 20 different location/buildings and these connect to the centralized data center where 6513 switches are working in VSS with 2T supervisor engine.Access switches considered as 2960 and its a POE...

Hi Guys, I have to setup a Lab to refurbish 2000 switches and routers I was wondering if there is a method out-here I can use to factory default at the same time at least 10 switches or routers because the time I have to do the job is very limited an...

Hallo Community, Ich besitze ein NMH410 mit der Firmware 3.18.15. Nun möchte ich die Einstellungen des NAS anpassen wozu ich das Passwort eingeben muss. Ich gehe dazu auf den Menüpunkt Konfiguration. Nach Eingabe des Passworts erscheint folgende Meld...

Cisco 4351 ISR. The 4351 has visually confirmed two DIMMS, a pair of 2GB. I can't tell which is the onboard flash or an MMC of 8 or 16 GB. However, when I calculate the DRAM from show ver I get 1687137K/6147k, add it up, 1,693,284K. Multiply t...

I started turn on the 3750 Switch, and i saw that again and again for one hour thanks for watching! all output console in the file: Note.txt

Hi Can anyone tell me why the brackets for the 2900 series routers ACS-2900-RM-19 have been changed. They used to have open ends so you could mount the cage nuts then lift the router on, then tighten on your own. The new brackets are closed so you h...

I have written 642-902 Implementing Cisco IP Routing & 642-813 Implementing Cisco IP Switched Networks. Can I write 300-135 TSHOOT and will it complete my CCNP certification.

Dear All, I am a beginners of Cisco Support Community. I had tried to design a routing system form CCNN2 books example. I had already succeed to build routing some of these. But I could not connect three Server in a 2811 router via vlan1 switch card....

Hey guys, Is it possible to apply dscp marking based on destination IP? My understanding is this, it is possible by creating an extended access list and then apply a route map out of the interface I want to send the traffic from. but this takes us to...

Hello I made an export template that works great for all products , but we build an UMBRELLA-SUB,  and trying to download it I don't see the tamplate I prepare , why?  

I installed Cisco AD Agent version 1.0.0.32 in Windows server 2012 R2 but it does not work when I run AD Agent adactrl.exe, it shows me the follow message:  Connection Error. Unable to connect to server: 0An exception occured! Connection ErrorFor fur...

Hi Experts, This query is related to Cisco Prime Infrastructure, we have added multiple devices in it. Few devices are OK and few devices are showing error partial collection failure. Attached is full details for error. we have two same devices, m...