Hi, I am trying to figure out how to simulate an ISDN and a Frame-relay network for studying purposes. Any advice and links on how to set those up will be appreciated. Thanks
Hi, I am trying to figure out how to simulate an ISDN and a Frame-relay network for studying purposes. Any advice and links on how to set those up will be appreciated. Thanks
Hi,I have a 3640 router with bri's in a routary group, i have a problem connecting to a cisco 803 isdn router. the 803 router is in australia and iam trying to connect from switzerland. The connection from the router 803 in australia to the router in...
Im not too familiar with the technical terms but I have a ubr900 series cable access modem and I have 3 computers off the router on a network. Basically I want to set up a server on one of these computers and I need to know how to configre this thing...
Hello, I need to configure a message to our dial-up users.Its a simple login message that appear "you are connected to ..." on the PC display on our customer.Who can i do it?We have a lot of AS5300Thanks.
hineed some help in configurin the chat script in which i need to include the intialization settings for my modem also.is this right ??but its not wkg...missing something somewhere..any inputs will be highly hlpfulchat-script Dialout ABORT ERROR ABOR...
greetings... have a bit of an issue seeing any kind of load sharing with eigrptampa03r01#shr 10.40.2.5Routing entry for 10.40.2.0/24 Known via "eigrp 100", distance 90, metric 2181120, type internal Redistributing via eigrp 100 Last update from 17...
Can this be done by erasing nvram and startup config?Thanksalberto
I would like to know if changing the speed or the duplex settings of a fastethernet connection between 2 switches would affect the tool connected to the access switch, is the tool going to drop any packets ?
I have a Catalyst 3750 with the Software (C3750-I5-M), Version 12.2(18)SE and can't find any command to configure NAT. The only commands for NAT are the show ip nat [stat | tran] commands. We urgently need the NAT feature. And also the Software Advis...
Hi,We have a Cisco 1700 with 2 x ADSL modules. (connecting to two different ISP's).And a PIX 515 connected to the ethernet interface.We are trying to configure a static incoming mapping for SMTP via the 2nd ADSL line. The static mapping is on the 2nd...
I currently have the addressing scheme set 192.168.100.0/24 and I am running out of addresses so I am going to change to 192.168.0.0/16 only have 1 gateway before I can get to every single machine to change them all some will be on one scheme and the...
In a company there are 35 departments are there. i am working as a network administrator. We are in the process of optaining BS7799 certificate. In that, i want to do the Network segmentation in my network. The plan is Server Segments are in one segm...
Is there any minimum requirements for bootldr???f.e. when i upgrading system image can i find somewhere what is minimum bootldr for this image????THX
Hi! I have this scheme with catalyst switches.client1-2950(1)-3550(1)-3550(2)-2950(2)-client2,3client1 ip - 192.168.1.2 netmask 255.255.255.0 default 192.168.1.1client2 ip - 192.168.1.3 netmask 255.255.255.0 default 192.168.1.1client3 ip - 192.168.2....
I would like to know if changing the speed or the duplex settings of a fastethernet connection between 2 switches would affect the tool connected to the access switch, is the tool going to drop any packets ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-17-2024 11:08 AM | ||
07-17-2024 06:07 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM |