I would like to know if changing the speed or the duplex settings of a fastethernet connection between 2 switches would affect the tool connected to the access switch, is the tool going to drop any packets ?
I have a Catalyst 3750 with the Software (C3750-I5-M), Version 12.2(18)SE and can't find any command to configure NAT. The only commands for NAT are the show ip nat [stat | tran] commands. We urgently need the NAT feature. And also the Software Advis...
Hi,We have a Cisco 1700 with 2 x ADSL modules. (connecting to two different ISP's).And a PIX 515 connected to the ethernet interface.We are trying to configure a static incoming mapping for SMTP via the 2nd ADSL line. The static mapping is on the 2nd...
I currently have the addressing scheme set 192.168.100.0/24 and I am running out of addresses so I am going to change to 192.168.0.0/16 only have 1 gateway before I can get to every single machine to change them all some will be on one scheme and the...
In a company there are 35 departments are there. i am working as a network administrator. We are in the process of optaining BS7799 certificate. In that, i want to do the Network segmentation in my network. The plan is Server Segments are in one segm...
Hi! I have this scheme with catalyst switches.client1-2950(1)-3550(1)-3550(2)-2950(2)-client2,3client1 ip - 192.168.1.2 netmask 255.255.255.0 default 192.168.1.1client2 ip - 192.168.1.3 netmask 255.255.255.0 default 192.168.1.1client3 ip - 192.168.2....
I would like to know if changing the speed or the duplex settings of a fastethernet connection between 2 switches would affect the tool connected to the access switch, is the tool going to drop any packets ?
I just uploaded a new IOS into a router abd tried to boot from it but it was not successfull as the router keep on rebooting as saying flash:xxxxx file boot not accessible.I could'nt get into the configuration mode.
I would like to enable my routers with rmon support, but I need to have the TopN function. I have read in the IOS Command reference that this is an version of IOS with explicit RMON option.These routers are 2610xm running 12.3(1a) IOS with the VPN A...
HiI want to monitor my WAN links in a way that the monitoring software should show me that, what are the activities going on my WAN links, it should show me all the protocols that are running on WAN links, and how much bandwidth is particular protoco...
What I would like to know how to do is route traffic to an IP address to a device on the inside using a Cisco 831 router. This is for the purposes of a VPN.The WAN interface will have the main IP address that the office building uses now. A second IP...
I don't think the sup-bootflash between two Sup2/MSFC2 will synchronize running Native IOS. So do I issuethe below to upgrade both? I know sync was automatic in CatOS...copy tftp://168.20.10.16/bca/c6sup22-pk2sv-mz.121-19.E1.bin sup-bootflash:copy t...
Dear all,I have a specific requirement which I want to fulfill using policy based routing. However , it is not working as expected. The scenario is as follows:I have a few vlans on MSFC, eg Interface vlan 1-5 with IP addresses 1.1.1.1 to 5.5.5.5 resp...
