I have a plane cisco catalyst 3524 xl and I need to connect ten PC two of which on a separate vlan but the switch only lets me enable one vlan at time.Can anybody help me figure out the steps I need to go through to make this simple lan work?thanks
The router is showing a configuration buffer full error when I try to "wr m". Besides summarizing some of the access lists and upgrading the memory, is that any solution out there that could solve the problem? I heard that tuning the buffer might fix...
I am changing out 2 RJ lynx dumb fiber converters to something managable, 2 3550s.so in the 3550s I am using switch 1 fa0/1 in, gig0/1 out.. Switch 2 gig0/1 in from switch one and fa0/1 out. configswitch 1fa0/1 switchport trunk encap dot1q sw...
Hello,I would like to know if the SAA feature RTR Responder is VPN Aware and the minimum version supportted.I've been made some test with several IOS versions and get not success.Thanks in advances
I have WS-C3550-48-SMI(IOS 12.1(9)EA1c) connected to a pair of Cisco828 linked together with copper over 3km at 1Mbits. Remote end 828 has computers connected to 2 of the 4 ethernet ports.I need to only allow the 2 computers to pass thru Cat3550 to a...
My site has: 1751 Router w/ADSL WIC and 4ESW WIC; 3550 SMI switch; SonicWall TZ170 25 Node. Our circuit is a G.SHDSL. I help putting it together.1. Physical connections for all devices2. Configuring the Router to work with the SonicWallCan anyone he...
I have a plane cisco catalyst 3524 xl and I need to connect ten PC two of which on a separate vlan but the switch only lets me enable one vlan at time.Can anybody help me figure out the steps I need to go through to make this simple lan work?thanks
Can anybody explain me about the implementacin of the cisco express forwarding( CEF)?? I need to configure a load sharing in my cisco 7513 router. I have 2 E1 connections, and my proposite is to have an equal load sharing with the 2 connections. We d...
We have a Sup1a-2ge, with 64mb ram. We need to upgrade to be able to use the newer versions of code. I've seen on the Cisco site,that there is an upgrade kit to upgrade the MSFC to 128mb ram. If you have the Sup1a-msfc, it is not field upgradable. Si...
Hello,When monitoring a Catalyst 6500 temperature, which temperature in the show env temp has to be monitored?Is it enough to monitor just one of them?Or shall I monitor all the outputs?Thanks in advance for any reply.Alex
Hi,Could someone tell me what the RCAPI directory number assigned by the ISDN provider is as I have contacted my ISDN provider and they know nothing about it. I am trying to setup a connection for OFTP (Odex FTP) using X25 over isdn and using a cisc...
Guys,i want to script the export of all my devices from me rme 3.4/5 database and copy this to a backup dir .,.i can import from CLI CRMimport.pl ...but is there a command to export from the CLI...i can find no mention of 1 many thankssteve
