Other Network Architecture Subjects

Hi there-I've been scratching my head over an issue that I thought was related to a PIX 515E firewall, but in a moment of inspiration I disconnected the PIX completely and found the problem persisted. I'm thinkng my router config is at fault- can som...

HelloI would like to configure WhatsUp Gold to receive some trap when the Failover is active.How to make it ?Thanks for your help

I currently have 2 T1's going to the Internet. Each T1 is with a different Internet provider. Is it possible to use both T1's (load balancing) for Internet access? And if one of the Internet providers goes down it needs to kick over to the other p...

I haven't seen any notice that the Pix Device Manager version 3.0 has been moved into general deployment yet?

I have already set my network up with 6509 (Core switch) and 4506 and 3750 as access switches. VLANs Load Balancing are also configured between EtherChannel links. Now Management requires to adopt 802.1X technology to secure VLANS since they want e...

Hello,Can somebody offer any advice on a config for the following scenario:user modem-T1-AS5350The T1 has an 800 number associated with the ports in groups of 4, e.g. group1 (timeslots 1-4) phone number# xxx1group2 (timeslots 5-8) phone number# xxx2e...

Hi,Can you please shed some light on the following SH DSL INT ATM X/Y output? I im not sure what the implications of high or low values of each are for troubleshooting?ATM Statistics: Interleaved-Path Counters: Cells: downstream...

I've got a 2610 with a 16-port Async NM that I'm trying to configure as a terminal server (console port of 10 routers and switches).I've tried using basically the same config from a 2509 that was working as a terminal server, but it's not working on ...

cisco has lots of Packages.- Virtual Packaged Cisco Base- Advanced Replacement - Extended Warranty- Software Application SupportWhere can I read info about it, what it is and what it offers to clients. The only info I could find at cisco web site was...

don't understand the below exactly . could you explain the exact meaning according to the realworld?To determine the bandwidth allocation for each queue, divide the byte count for the flow by the total byte count for all flows. For example, if you ha...

Hi!I've got a Cisco 7200 VXR with a 12.3T IOS. This is what happens: I have a switch with 2 routers (Router A - the 7200 and Router B - one 3620) and one firewall. Router B has a static route to Network C via firewall. When a packet arrives at router...

How do I remotely identify whether my Catalyst 5500 series switches have SupIII's with NFFC, NFFC-II, NFFC-A, or NFFC-IIA?

On the Cat6500 running native IOS level 12.1.13 - 12.1.19 when you perform a show policy interface you do not see the stats for the default class. I see this on other platforms and also on the 6500 in 12.1.8x. Does anyone know if this is a bug or i...