Other Network Architecture Subjects

- Catalyst 6500 with Native IOS 12.1(13)EAnybody out there who knows the reason why?There's actually no problem with the GBIC ports but I'd like to know if this kind of status is normal or not. I also have the same results with 16-port GBIC modules b...

I have 2 branches offices, both are using Newtork ID 192.168.100.0. They r going to be connected with Cisco 1721 series router at each branch using leased lines. Can I configure the routers to act as bridges, or there is any way to do this design.

I have connection to 4 upstream ISP: ISP1, ISP2, ISP3, ISP4. I have a customer (CUSTOMER1) with their own AS and BGP peering with me, they need only prefixes coming from ISP1. When I peer with them and create a route map to advertise to them only pre...

hi!P 172.30.20.0/24, 0 successors, FD is 28416 via 172.30.250.1 (2279168/1767168), Serial0 via 172.30.250.189 (2279168/1767168), Serial1 via 172.30.250.5 (2279168/1767168), Serial2 via 172.30.252.2 (28416/2816), FastEt...

I have a c3524 and at its last port (24) I have a cross cable connected to the first port (1) of the c3550.it starts working (see the leds on) but after a while the leds turns off and everybody connected on the c3550 cannot connect to the servers (th...

hi alli m trying to configure HTTP web access in our router for the local lan users only.i hve enabled the server using ip http server ,enabled the port 8080 ,enabled the authentication using enable.everything worked fine.but later we configured AAA ...

I have 3640 running at about 90% (show process) load. What is ur suggestion? What are the factors and/or steps involved to ease off the router from such load.

Is it possible to mpliment dial backup using dialer-watch based on dialer profiles ( not legacy DDR) ?

I have a c2610 connected to a cisco7206 over Frame relay. c2610 is using FRF9 compression and 7206 is using Compression service adapter. Its giving following error at 2600 side. My question is thsi type of setup supported ? it gives errors only ...

We have the following CISCO equipments in our inter-network which has to be monotored by up to 14 SNMP managers :- Catalyst 450X with SUP 4- Catalyst 3550 - Catalyst 2950 and- CISCO router 1760Questions :1-Do you know if there is a limitation on the ...

I'm getting following stats for 'sh buffers' but there are absolutely no errors across the interfaces . I was expecting to see some errors. Is this correct ?------------------ show version ------------------ Cisco Internetwork Operating System Softw...

My router has following comand,I can't understand what's the function of it.can anybody help me ?thanks!int bri 0/0ip addr 10.1.100.1 255.255.255.252dialer map ip 10.1.100.2 name routerb 9822233dialer map ip 10.1.88.1 name routerb 9822233dialer map...

can you have PPP w/ chap on an ethernet interface so you authenticated credentials aren't sent clear text? default is ppp how can i change that?