In Usertracking missed computers connected to 2912LRE. On 2912LRE it is used IOS 12.0.5. WC7. In RME and ANI the switch is determined as CiscoProducts.370. How it is possible to correct a situation?
In Usertracking missed computers connected to 2912LRE. On 2912LRE it is used IOS 12.0.5. WC7. In RME and ANI the switch is determined as CiscoProducts.370. How it is possible to correct a situation?
I have a problem using the IOS DHCP server option.When clients roam from network to network they retain their old address and do not get a new address in the new subnet.Checking with sniffer this behaviour against our normal DHCP server I find that t...
Hi All:I would like to enable port security on 2950 , but i got reject message , pls anyone tell me what should i do ?2950(config-if)#switchport port-securityCommand rejected: Not eligible for secure portThanks in advance
I have a question , on the 3550 when you configure trunking and vtp how come none of this stuff shows up when you do a "show running config" and how does this get saved to a tftp server if it doesn't show up in the running config ? Am I mi...
Could somebody please tell me why when I load VHM my topology services quits working "ANI Server not available" type message I have tried loading patches. etc etc... Same thing CD1 5th edition VHM 1.1
I have a cisco 3640 router with 12.x ios running. I wanted to make my router as application firewall to intercept all the connections for my web server and i configured like this ip tcp intercept list 103access-list 103 permit tcp any host x.x.x.x1(...
If need to use Vlan X ( x not equal to 1), is the trunk is necessary for 2950 and 3com switches to connect to upper switch 3550? or any other simple / default connection way could work? thanks much!
Hey ,has anyone had any experience with using content filtering on a 7206 router? What IOS should I be using?Thanks in advance,Rick
I am going to configure 2 routers for a client who has a 3160 paradyne csu/dsu that connects two offices via full t-1, 10 channels are being used for voice and the remaing will be used for data. (point 2 oint) We have 2 1721 routers on either side....
I have a 5350 router, and it has two E1 interfaces. The first E1 are linked with PBX (ISDN Q-Sig) and the second E1 I used to remote access with E1 R2 linked with PSTN. The problem with remote access is that some users get a password error from radiu...
Anyone knows any product/app that does VMPS? Nice looking GUI, easy data entry, etc? Thanks,
I have a 2610 router that is performing very slowly yet connection to our hub site is fine. An int s0/0 shows that CTS is in a downed state. DCD,DSR,DTR, and RTS are in an Up state. I would suspect that the external CSU/DSU would be the problem but a...
"no ip directed-broadcast" set.May there is a way to stop router answer on requests to broadcast address?Net subnetted with 6 subnets so 12 extra access-list rules not seems agood idea.
We are using WOL successfully on individual segments of our network but cannot wake a PC if it is on a segment other than the management PC.Our network consists of 2 - 6509's at the core and 40 fiber connected locations running 3500 gear. Each locat...
Can any one tell weather 3550-12G switch is good enough for Campus design as distribution switchs and for L3 config and for redundant design. (for Building block design) connect three building block via two 3508 used as core L2 switches) Can 2 10/10...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-17-2024 11:08 AM | ||
07-17-2024 06:07 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM |