Hi,I am trying to add the switches in RME into nGenius. I've followed the instruction in the online-help but when I execute nGeniusCiscoImport.bat I get errors like : [13:41:49]FileLoader:Error Inserting Cisco Switch Record: com.sybase.jdbc2.jdbc.Sy...
I have a WS-X6380-NAM Sw : 2.1(2) in a 6513 Sw : 7.3(1), after changing the root password from root to my own, I can no longer log into the NAM module as either root or guest using default passwords or my own password.I have performed a "clear module...
Has anybody experienced this problem? It has happened fairly regularly, but is not only restricted to when CW2K loads up. I do not get any messages in my log other than the switch is reloading. I cannot do too much testing as this is a live environme...
After recovering the ANI database two weeks ago, User Tracking discovery seems to be stuck in discovery mode. It hasn't updated any records since the re-init, and when checking discovery status it says it's discovering and that status never changes....
SUP1 shows Pinnacle error and continually reboots itself, have tried loading new IOS with xmodem but it will still not boot. Problem began after installation of a WS-X6348-RJ-45. Cannot get to console at all can anyone suggest a resolution. Thanks D...
Could someone please help me out and let me know what this could potential mean.************************************************************************************FastEthernet3/25 is up, line protocol is down (monitoring)****************************...
Hi there,I have a litle problem im implemeting a LNB (loading balacing) in a 3500.Is a DMZ area but i need to implement a bit of security.So i created some mac-address statics like thismac-address-table static abcd.abcd.abcd source-port destination-p...
HiI have read RSVP use WFQ to allocate resources and since IOS 12.1(3)T it can use LLQ too.But what happen if we are not ussing WFQ in the same interface that we are ussing RSVP?I have tried it and it seems to work. But why? can I use RSVP with any q...
Here is the situation... Due to a recent security issue, the powers-that-be would like to set up an ACL and log the traffic against that ACL to syslog. We are running CiscoWorks 2000 on a Windows 2000 server (unfortunately - thats another story). ...
Hi all,we are experiencing a long series of %SYS-2-MALLOCFAIL errors on a Catalyst switch C2924XL. During this condition the device is completely not-responsive and even logging in with the console port is impossible...An example of the error is:%SYS...
I cannot find a product reference code for an x.21 DTE to DCE back to back cable, can anyone help?I want to avoid using separate cab-x.21MT and cab-x.21FC cables as the routers I want to join are co-located in the same rack.Thanks,Matt
Typically with NAT you are changing either and inside or outside address to another address. Is if possible to change both inside and outside addresses within the same router? That is rewrite both source and destination addresses within the same rou...
Hello,Recently we've added more web servers and databases to our 4003 switch. I've noticed a slow down on the LAN but am not quite sure if the switch is the reason.Running show system, i see the peak as 0%, running show traffic 0%, the Utilization LE...
