I am unable to telnet to one of our 1924 switches, it was deployed without an enable password. Can this password be set with SNMPSET if the community name is known? What is the snmpset command line to perform this task.Thanks in advance.
we have cfm application intalled with ciscoworks2000 on NT 4.0 server. but I cannot run the cfm server the system is giving an error jrew.exe...any help
I have a customer with an existing Cisco 1721 equipped with a WIC-1DSU-T1 for internet access. The customer wants add bandwidth with an additional T1.The ISP they have been talking to says it's as simple as adding the new T1, adding another WIC-1DSU...
Is it possible to impliment MHSRP on routers running BGP and OSPF? IF I have multiple secondary addresses on the ethernet interfaces can I also assign multiple standby addresses and have only two networks use these addresses as their default gateway...
I've got a Cisco 3661 router running with 2 slots occupied by two 4 ports WIC card (4MT). We also have three fiber links all connected to a 2924 Cisco fiber switch. We are thinking of removing the switch and connect the fiber connection to the router...
Hello.Can anyone explain (in details) the meaning of the following lines, taking out of the show controller cbus for CIP2: Load metrics: Memory dram 28155800/64M CPU 1m 8%, 5m 8%, 60m 9% DMA 1m 1%, 5m 1%, 60m...
I was trying to practise configuring the priviledge level on IOS 12.2. The aim is to provide a user with priviledge level which he can execute ALL the show commands.I configured the router with the following:username operator level 5 pass xxxxenabl...
The following question is kind of a more of HOW TO, and how I would approach gathering this information.I am trying to find out how to gather only IP printing traffic to ultimately decipher how much printing traffic goes through a specific Fast Ether...
We have a number of sites containing 2900XL-series switches, which are dual-connected to our two core 6509 switches. UplinkFast is enabled on the access-layer switch and this works very well (the blocking link transitions into a forwarding state if t...
I am having some of my Trunk links being changed from "on" to "auto" and the set to include all Vlans with none pruned. Will CW2K make these changes without being prompted. VTP is set to transparent on all switches.
well this is a strange case. I have few PCs that I cannot establish connectivity between local VLANs. However, I can ping other PC at remote location across WAN, ping Internet servers, but no connectivity to other VLANs at local location. And gues...
Can someone tell me if a WIC-1ENET(a 10baseT ethernet interface for the wic slot) for a 1700 router will work in a 1601 router as a second ethernet interface?
Hi.I want to gather the bandwith utilisation on some subinterfaces in one FE PA instaled in a vip4-80. When I snmpwalk our router it returns only the physical interfaces. I can see any subinterfaces.The PA is: PA Bay 0 Information: ...
