Dear All, Since the flash card for 1720 router is not hot pluggable,how is the procedure if I want to replace the flash card from my 1720 to a fresh new one but I want to transfer the IOS from the old flash card ?Thanks in advance.
Sorry i ask the wrong question in the last post :Again the question:about the Configuring a Relay Agent on Cisco What Protocols I need - are these Protocols all necessary for the DHCP Relay Agent and can i let out or jump Protocols ???The list of Pro...
Sir,I have two offices connected by a 64 kbps leased line with two Cisco 2620 routers. In branch office I have a SAP server and few users.From the Head Office few users access SAP server. I have setalite link to ISPat Head Office for internet access....
hi,I know that the maximum distance for LRE is 1.5 Km.I already bought a LRE switch with the cisco 575 ,then I discover that the distance between the two site is around 1.7 Km, i tried to connect but I couldnot :(is there is a way to increase the max...
Hi all,I need help urgently, I got a network setup as follow; on the customer end we have a cisco 2621 with a 1mb leased line connect to a 2503 (A) router, on our side a 2503 (A) and a 2503 (B) is connect to a hub, currently the 2621 cannot ping/teln...
I am trying to configure site "A" (2501) to dial site "B" (2501) using DDR. Site "B" has a FR circuit back to headquarters site "C", so that it can allow site "A" to access the FR circuit. Does anyone have a sample config that I can look at. I am a ...
what is the difference between these two versions?Do they need to be the same version in order for best performance?And if i upgrade the main ios version,do i need to upgrade bootstrap version too? If i don't ,is there any problem?
Can this be done...[Client]<---wlan-->[AP]<--eth-->[cisco1700]<---serial(leasedline)-->[3600(nas)]What i'm doin is to enable pppoe over wlan. Can cisco AP bridge the client to the nas. What are the requirements and settings for the AP/1700/3600??Can ...
A customer of us is in the middle of a rollout of a new switches network. Is it wise to choose the Hybrid mode. Is Cisco still developing on the CatOS or isCatOS an ending story. Are there good reasons why we would use IOS on the 6513 with msfc2 and...
There is a lot of documentation on CCO regarding the security of IOS passwords such as the nonreversible encryption (Type 5) of the enable secret password and the reversible encryption (Type 7) of everything else (local username database, line passw...
Sorry to cross-post, i put this in the wan forums before realising there was a remote access forum.Thanks for showing an interest!Here's the situation, We have a remote site with a frame relay connection (via ser0) which we want to back up with an is...
Hi,I'm configuring etherchannel betwee a 2948G-L3 and 2950 switches using four 10/100 connections. When i test the connectivity by pulling one or two cables, sometimes a connectivity is established sometimes not. I really appreciate if you have some ...
I have a catalyst 4006 I would like to know if is possible to assign multi vlan ports without layer 3 module. At this moment i don't have layer 3 module in the catalyst. is possible? Or i really need a router or layer 3 module to do it?
I have a catalyst 4006 I would like to know if is possible to assign multi vlan ports without layer 3 module. At this moment i don't have layer 3 module in the catalyst. is possible? Or i really need a router or layer 3 module to do it? Please r...
