Other Network Architecture Subjects

I was doing some configuration reviews today, removing some lines that needed to be removed and came across an ACL I have never seen before.  I sure wish I could copy and paste into this thread!ip access-list extended cpp-managementclass-map match-al...

In my network I have to implement an high availibilty HA for the microsoft print services. I use the ACE 4710 in a new context with an unique vlan 103 hosting the ACE and both the microsoft printservers. I absolutely want to avoid the cluster SLB of ...

Can the ISG (Intelligent Services Gateway) redirect UDP traffic?On the documentation, I can't find where to specify protocol:redirect to{group server-group-name | ip ip-address [port port-number]} [duration seconds] [frequency seconds]

We are considering installing our DHCP services on cisco switches but how do you configure the dynamic DNS updates, which need to be send to a windows server, for DHCP clients registering on the CISCO IOS DHCP server ?

Case:--------CE -  (1841 + 4 s hdsl Hwic) device ISP  -  DSLAM (Zyxel) Dslam and Hwic supports ITU-T 991.2 standards In cisco compatiblity data sheet, it is compatible only with DSLAM ALcatel, ECI, Lucent But Zyxel is not mentioned. Here are my queri...

What is the difference between the PA-T3 and PA-T3+ port adapters?Thank you

Hi, This is the first time I have touched a 6500. After not being able to enable IP routing on MSFC2 I decided to upgrade the IOS and I downloaded the IOS from Cisco but I couldn't get IP routing enabled with the new image. I thought the reaosn for t...

Hello All,I´m trying to find a way to find how many traffic is sending my router for an interface, with each DSCP mark and identify which traffic is this (for example matching to NBAR).Do you know a way to do this?Thanks

This is my first post and I'm sure it will generate a chuckle or two.  I'm working in an antiquated facility with a hodgepodge of network infrastructure.  Copper, Fiber, Ethernet, Wireless, and LRE.  Our end game is to enable a video conference syste...

Dear all,We are looking for a way to test a link of 100Mbit. We want to generate enough traffic to fill up the 100Mbit link.there is in the IOS the possibility for using chargen, but this works only on very small links.We tried the ttcp command, but ...

ForumI have been tasked by a client to redesign their IP network.  Their current network is comprised of:Many Frame Relay WAN Circuits that have many spokes and two hubs.  The two hubs are their Headquarters and Disaster Recovery sites.3 MPLS WAN con...

Hi Folks,I am looking for Mean Time Between Failure (MTBF) and Mean Time to repair (MTTR) of the following: WS-4503WS-X4013+WS-X4148-FE-LX-MTPWS-C45-1000ACWS-G5483Could anyone advise me these figures please. I highly appreciate that.Cong Pham