hello i activated syslog in my PIX. i am receiving many syslog msg in this format: deny tcp source outside:PBIP/80 dest inside:MyPBIP/rndport where PBIP is a public IP and MyPBIP is the public IP of my external interface in PIX. they seems to be like...
I have Cisco 6509 software as "IOS (tm) s72033_rp Software (s72033_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF6RELEASE SOFTWARE (fc1". please tell me tha latest IOS software and its comparison with my above mentioned software
Hi, I have two Unified CallManager6.0 and 2 voice gateway Router 2821 and two Internet Gateway Router all these are Redundant Link So plz Guide me with a good configuration Actually tell me the best Protocol which MGCP or H.323 i have E1 Line so send...
I am working in a very sensative environment so I want to ask questions before I do anything. If I redistribute static routes into eigrp will the gateway of last resort also be redistributed? each site has its own connection to an ISP so I do not wan...
Hi,We have bought a new C4507R to replace our 4506.We have taken our 2 Year Old WS-X4515 from the 4506 and put it in the 4507 but it doesn't work. No LED's come on and the console port is dead.We purchased a new WS-X4515 with the 4507 chassis and tha...
Here is the issue, I have a printer (192.168.0.207) on vlan 8, if I am on another vlan say 6 (172.19.0.20) (Routing between vlans seems to be fine) I cannot ping this printer, but if I am located locally within vlan 8 I can ping it just fine. This is...
We're replacing legacy switches with 3750s in the coming months, and I have a question about stacking and port channel.The 3750s will be Layer 2 switches, and each will be uplinked via Gigabit fiber to a pair of 6500s acting as Layer 3 distribution s...
Hi Netpros,How to do port mirroring on a switch and can it be possible on router also .How to analyse Protocol Analyser software , i am using wireshark ???
I'm having an issue with term mon not displaying messages. I enable term mon on telnet connection and have checked the log settings and monitor is set as debugging. I am mainly interested in seeing line up/down status so I set a couple of interface...
1801 with 8 port LAN routers were deployed as part of managed WAN. We've asked them to turn on port security. They said it wasn't supported. Does the 180x LAN ports have same port security features (i.e. MAC address learn/lock) like standalone swi...
I'm planning the new structure of network in my job. I thought in use some class B networks subneted, but other people told 'hey let's use a class A network So, we'll never ever have trouble with missing adresses'Is there any problem if I have my sub...
I'm working on a network upgrade project and currently have a pair of 6509's at the core. To successfully perform the planned upgrades I require e-series models. The problem is that I'm not sure if the current switches are e-series or not. Is ther...
This question is simply a mental exercise I was running through. When I wasn't 100% sure of the answer I thought..."NetPro!"(see attached pic)Assume I have a stable STP tree, then I add gig link between SwitchC and SwitchD. My question revolves aro...
