Hi, everyone, I'm playing around with Packet Tracer 7.3.1 and a switch 3560-24PS and sticky configuration.I have a scenario where maximum allowed addresses is 2 and this is done by means of a hub.One of them is configured manually with(config-if)swit...
Hi Guys,I'm following lab instructions in this version of PT. I don't think I can say too much about the lab here as its paid material. Anyway, please see the below image. I'm experiencing an issue getting the image of the webcam view to display at a...
Hi everyone,I was wondering if Cisco offers any network and security design and architectural designs and drawing for best practices specifically for shared coworking environments like wework. I would presume that it would be a slightly altered camp...
Can someone explain to me the difference between a Default Gateway and Gateway of Last Resort?
I have Cisco ASA 5585-X with SSP-60 running in HA (Active-Standby). I would like to configure failover virtual mac address to avoid arp issue during secondary to primary failover. (Its Cisco best practice to use virtual mac). In my case i have bunch ...
Dear all,i do have 3 2600 series, one 1750 and one 1650 routers for my lab experiments. all of them having WIC 2 T installed. other specifications are usual. one ethernet, one aux, console ports.how can i connect to all of them, using a single te...
Hi experts!I run sh int ethx/x command to see port speed whether it is 1 gig or 10 gig. But i confused because it said "Hardware: 1000/10000 Ethernet" but it also said "full-duplex, 1000 Mb/s, media type is 1G". So it is 1 gig or 10 gig? The interfac...
After logging into the firewall IP which is Cisco iOS machine(Customized Linux Machine),using the command 'sh xlate' , I will get the list of IP's which are already NAT 'ted. But I need to find the Free IP's which are not NAT 'ted. So, Is there any c...
Hi, Please assist me in resolving an issue i have with my switch i am trying to install an IOS using the Solar Winds TFTP tool. can anyone please assist on how i can do this.This is what i get Using driver version 1 for media type 1Base ethernet MAC...
so i have a problem when i want to ping another pc in another building the result is destination is unreachable can someone help me and i also post my tophology but apologize me because i upload it in txt so probably you should change it to pkt btw ...
i guys, I'm quite new for automation but learning. I have a script for backup cisco configuration but my problem is I can't find the way to save the backup for each command. The ideal is when typing show run, show ip int br, show inventory it will be...
I have to configure the SD-WAN in the ASA of the branch and HQ. But our firewall is situated inside the LAN. so, I need to know how to configure SD-WAN on both ASA? is it possible? please advise me. Thanks.
Hello, I use Packet Tracer for my lessons, I am an instructor in the armed forces, and I am facing a small problem in my activity creation. I would like to set up vlans in random mode. I defined a number variable with a min and max number for my Vlan...
I setup one pool for dynamic DHCP bindings and one for manual bindings(mac-to-ip static mapping).But I always get the address of dynamic pool.Any suggest?
.jpg "VIP Community Legend"){kind=icon}
.jpg "Hall of Fame Master"){kind=icon}
