I have a situation where an external company wants to NAT 6 of our addresses on their network for access to a server.We do not want them to have access to anything else.Is it possible to do this with an access list?Fo example, if they wanted the addr...
I do a sh buffer; I can see a large number of failures. The first thing I like to do is to reset the counters. And I can't find the command, anyone care to help?
I have 30 3550 switches and 2 VPN 3005 Concentrator's that need to be fixed for the new Daylight Time changes enacted by Congress. I was wondering if anyone knows when the new codes will be ready to go?For reference: Old Daylights Saving Time - fir...
I find all the commands for configuring the CC 3550 switch as a DHCP server but not working ...can I make it a DHCP server? and when it asks for the server IP is that a VLAN IP or do I need to config an individual port with the server IP on the same ...
Can these 2 devices support gig etherchannelling? I need to trunk 3 gig ethernet between 7613 and 12416. GSR does support portchannels but to allow trunking dot1q must be configured. If any one is doing this please print a sample config.Thanks.
Hiif i have 20 vlan;can i assign a unique group number(HSRP) for each vlan or 1 group numbere for the 20 vlans.what is the difference between 1 unique group for each vlan & 1 group for all Vlans?10xs
Hi,Would appreciate some advise on the following:background----------server1(e.g.vlan10) and server2(e.g.vlan20) experienced NFS timeout. Starting from server1 to server2, they are 6 hops away. ping is ok.1) is 6 hops too far away? or2) should the ar...
I got the follwing messages:SSG-ERR: SSG opengarden - ssg_downstream_og_dnstranslator:failWhat does it mean?And my client need more one minute to login.
I have a peculiar problem with two gbic modules of Catalyst 6500.First problem, I have a gbic port in module 7, which was a trunkport to Catalyst 2950, that does not allow conection to switch Catalyst 2950, and besides it harmed the yield of Catalyst...
Consider me mostly a newbie. I have a router that's connected to a WiFi radio system. The radio is, for all intent and purposes, transparent to the network.Point is now, I want to connect via the same WiFi radio system to 4 other routers (each other ...
I have a question regarding private Vlan config. I have a DMZ switch where I need to be able for a particuilar server to communicate to the reset of the servers on port 8686 and deny the rest of the communications between them. I have this server on ...
Hi there,got a aproblem with a 2801 router that intially had IOS version - c2800nm-spservicesk9-mz.123-8.T11.bin, I then tftp'd another one on to it c2801-entservicesk9-mz.124-2.T5.bin and added the necessary boot system commands; config-reg was at 0...
Is it possible to have pc's split via a vlan, yet still on the same subnet, that can see each other ? I have a debate this morning, as there is no point doing that
Hello, Can anyone tell me, what the file k2diags.2-0-1.bin in the bootflash of a Cat4506 is for? Do I need this file to boot the switch or can I delete it?Thanks a lot for your support.Phil
