Other Network Architecture Subjects

I'm curious about how to implement 2000 cisco 877 routers. Implementation: Updated IOS will be copied and a configuration will be copied to the routers. Only IP addresses in the config will be changed. This is a simple work. However, number of the ro...

regardsNeo

HelloI have a 3750 48 port PoE that has 20 AP's on it. It has run for the past year without issue. Yesterday we had bad storms and I noticed all twenty APs were offline. Checked the switch and the inline power wasn't working, did a shut/no shut st...

Hi,I am facing problems with CE 500 switches. After i initially assign an IP to the Switch using the GUI and click on the submit button, It still shows me a blank in the IP address field.additionaly then i am not able to access the switch thru the GU...

There is a peculiar and strange thing happening on our network. We have a Switched VLAN L2/L3 network and are able to ping anywhere on the network via MSFCs.Today, we are not able to ping a particular PC but a singe PC can ping this same server. We h...

I'm stumped as to what to track for this given situation:What interface should I track for the INSIDE ROUTER A & INSIDE ROUTER B in the event that if OUTSIDE ROUTER D loses the WAN link?What would be best practice in this situation?

How should I configure the smartport on a catalyst express 500 switch if I am connecting a non-cisco switch like a small linksys. I dont think I can make the smartport a switch because it tries to trunk?? right??And if I leave it as a PC it complain...

What is the process of putting 2 Ip subnets on interface.172.16.0.0 255.255.0.0&172.30.1.0 255.255.255.0Or is it even possible?Thanks in advance

I have a situation where an external company wants to NAT 6 of our addresses on their network for access to a server.We do not want them to have access to anything else.Is it possible to do this with an access list?Fo example, if they wanted the addr...

I do a sh buffer; I can see a large number of failures. The first thing I like to do is to reset the counters. And I can't find the command, anyone care to help?

I have 30 3550 switches and 2 VPN 3005 Concentrator's that need to be fixed for the new Daylight Time changes enacted by Congress. I was wondering if anyone knows when the new codes will be ready to go?For reference: Old Daylights Saving Time - fir...