Other Security Subjects

I have two Pix 515s running Pix 5.3 configured for failover, and have one external interface (among six total) over which numerous inside hosts in various subnets connect via static commands. The external address range assigned via those commands is...

Ok I think it's how I have the network setup but I am not sure how to get around this problem. we have two machines 192.168.0.5 and 61 192.168.0.61 is the proxy and can get out to the internet we want all web traffic to go through this for reporting ...

I am trying to allow port 443 accessible to the outside to a machine on my internal network. we have a private ip subnet so I have nat working. here are the commands. (changed IPs per boss' request)access-list outside_access_in permit tcp any host 2...

I get the message below when I run SigWizMenu. Is there anything serious with the two "Unconsumed token..." lines?Thanks in advance,Chris-Load File: /usr/nr/etc/SigData.confUnconsumed token(s) [DeObfuscate True] passed to parameter "MinHits"Unconsume...

How can I restore the factory default setting of the IDS 4230 from CLI ?I need a CLI command to clear all the configuration of the IDS and return back to the original default setting ( default ip add. , original password ) ? looking for a CLI command...

Information : Our LAN 192.168.168.0/24 with a PIX515 as gateway (192.168.168.254)Other gateway in our LAN (192.168.168.201) with tunnels with the Intranet of one of our branch office (Branch office LAN : 172.16.0.0/24).Description of the problem :We ...

I am using VMS 2.1 with the IDSMC and have both 4210 and 4230 appliance sensors running the 3.1 rel in production and 3.0 in test. I am running into problems pushing the new configs to the sensors... after I deploy them, the changes remain in "pendin...

I am trying to route clients behind the firewall to another server on the same interface, so what that means is when they look for 55.55.192.70 i want them to go to 10.0.1.70 on that same interface. I can do this fine with DNS doctoring but I have cl...

Dear Sir/Madame, I have an urgent question regarding Cisco Secure Policy Manager. I am working on the provisioning solution and one of the target resources is Cisco Secure Policy Manager. Basically, my question is - is it possible to create Secure Po...

Have ftp clients connecting from the outside of a pix to a FTP server on the inside. Active FTP and passive FTP works fine internally. Have one to one static mapping of a global ip address on the outside to the ftp server on the inside. Active FTP fr...

I would like to verify the operation of access-lists and conduits. As there are existing hit counts, I would like to start at zero with them all to be sure I am affecting the changes I desire. What is/are the command(s) to make all the counters assoc...

I Have a DMZ interface with 25 hosts. I have many kind of groups in the DMZ like www-servers;ftp-servers;DNS servers and I use them to make rules.After the mumber of hosts of the DMZ grow up ;whem I was editing a existent group the windows "members n...