Routers - Small Business

Hi CommunityIs it possible to combine 2 protectlink licens/products on the same hardwareExample1xRVS4000 with Web and Gateway protectlink

Hi,I have an RV180 VPN router.I try to enable the VPN users with PPTP or QuickVPN but is not working.For PPTP sometimes my windows 7 connects to the router, sometimes doesn't connect with a random error message.When it connects, the windows 7 from ou...

Hi, i have a Central RV-042 with 2 routers  (another rv042 and a RV110W) conecting as a Gateway to Gateway VPNThe Central router have the net 192.168.1.0The Other RV-042 have the net 192.168.2.0The RV110w have 192.168.3.0 as net.The problem is that I...

Hi,I've got a config I use and so far it's worked without issue.The config template was created on a 771 router and I'm applying it to a 880 router.I'm trying to use this router for a home business. It needs to allow internet access into the home LAN...

I am getting the message '400 bad request' whenever I try to backup the configuration or export a certificate under Certificate Mangement. Anyone able to fix this?Thanks

Hi,I've got a config I use and so far it's worked without issue.The config template was created on a 771 router and I'm applying it to a 880 router.I'm trying to use this router for a home business. It needs to allow internet access into the home LAN...

I have been trying to track down why my openNMS system has not been recording statistics from my new RV042G router.It appears the router is not reporting sysObjectID correctly.snmpwalk -v 2c -c public 10.0.0.1 sysObjectIDSNMPv2-MIB::sysObjectID.0 = O...

hello,I have an static ip in my office and i want to create a vpn tunel but in QuickVPN i am getting --> Failed to Ping remote VPN RouterI have also a dynamic ip and  i have the same error can some one help me?ThanksRouter: RV042GWANIP Address: 192.1...

Hi there, I have a RV042 and upgraded it to the latest firmware available. The problem is the following:when I have on WAN1:PROVIDER A - MUNDIVOXIP: 200.201.190.202 SM: 255.255.255.248GW: 200.201.190.201DNS1: 200.196.48.20DNS1: 200.196.48.21and on WA...

A nmap scan from the Internet (WAN) against a Cisco RV120W shows an open port 916/udp. This port remains open even if one writes an explicit access rule for the firewall.A quick googling shows that this port is probably used to access the firmware of...

I have a Cisco Small Business RV180 and I have several VPN users configured.  IPsec between my home router (also an RV180) and work router (router in question) is working fine, several PPTP users working fine and 1 QVPN user that works as well.  I se...

Hi, I have a site to site VPN set up on a SRP 527W router. The local subnet is 10.0.0.0 and remote subnet is 192.168.2.0. I can ping site to site. The problem is that the router on the 192.168.2.0 network has routes to other networks. say 192.168.16....