Routers - Small Business

I have a CISCO RV 120W router. I have set it up with a static IP address from Verizon DSL. Internet can be accessed.I just want IPSec passthrough for some people who can connect with Nortel contivity client to the company RSA server. I can make only ...

I have known about this issue for a while and was wondering if there is a fix or something.  Someone else in internet land also figured it out somehow.  I have two wrvs4400n's successfully vpn.  I run win2003 server.  Computers in the remote location...

This line of product is basically created a lot of false expectation, if you see the basic configuration:1. You will expect it has a full VPN function; sorry, it only provided a site to site, not wanna can route over to the other side public internet...

Hi.I tried to use Migration Utility v 1.2.2.0 with configuration file from older unit having VPN tunnels and application is crashing with windows MFC error(on several computers, so it is not related to PC).Migration from V2 to V3 of configuration not...

I am very dissapointed with Ciscos release of the SR520. I was excited at first having a good software feature set and rack mountable (about the only ADSL router I have found that doesnt need a shelf). My dissapointment was with the CCA config softwa...

Hello, sorry my English, I am from UkraineProblem with SRP521W1. VPN IPsec Site-To-Site SRP521w to Cisco 2801 IOS not work, only work with SRP521W to Linux Openswan(IPCOP)2. Voice : SIP Line 1 and SIP Line2 not see the SIP server behind the IPSEC tun...

Hello,I need to configure 20 SRP527. What is the fastest way of doing this?  How can I edit  .CFG file?Thank youS

Hi.Is there a way to get via web interface or via snmp data regarding CPU utilization, idle time etc for RV042 / RV082 V3?I am using RV082 with 96 vpn tunnels on each unit and would be nice to have such info.In RV220W I saw that in new firmware (1.0....

So, I'm trying to set up a VPN tunnel between two sites.  Site A has a RVS4000 as the router to the internet.  Site B has a Adtran NetVanta 3200 to convert a frame relay to ethernet, so I can't replace the Adtran.  How do I set this up so I can creat...

SNMP available only on local switch port but not remote via VPN or WAN. Anyone have any ideas how to 'workaround' this issue?Thanks, Scott Huntersphunter@scotthunter.org

Hi, I am not sure if I am posting in the right section but I have a little problem with NAT I believe.Basically the problem that I have is that I have a new Exchange server sitting on 192.168.12.2 IP address and on the router I have this NAT enabledi...

Is PVID the same thing as "native vlan"? Can the native VLAN be changed on a SA520? Currently I believe it to be 1, I'd like to change the native VLAN to 10.I have a scenario where I have a prexisting production LAN of  192.168.1.0/24 . It's a small ...

Hello,since I upgraded to the new firmware, it takes almost 1 min to my computers to access the network/web when they come out of the "sleeping mode".Is there a setting somewhere in the router that I missed ?Thank you.Marc

Hello,I configured ASA5520 and RV042 for site-to-site IPSec VPN tunnel.Tunnel get connected, but no ping, no traffic between both end network.Network:=======192.168.113.0/24----------192.168.113.6 -ASA--------public, static IP address------Cisco 2821...