Routing

Hi Guys,Good day!Previously /24 subnetting is suffice to our users, but moving forward to a bigger number of users I'm looking to extend our subnetting to /22 to accommodate the whole project site network. I'm detailing our estimated users, as well a...

Hi, i want to setup multiple site to site connection, between my headoffice and remote offices.on HeadOffice, i've cisco router 2821, with IOS model:c2800nm-adventerprisek9-mz.124-20.T.binThere is no extra hardware module on this router, and i want t...

HI,i have VWIC2-2MFT-T1/E1 card installed in 2821 ISR router, ios (C2800NM-SPSERVICESK9-M), Version 12.4(25d).does this IOS supports unframed G.703 and also does this card VWIC2-2MFT-T1/E1 supports unframed????

Hi All Members, I am having problem in applying the qos in ethernet over mpls(EOMPLS).CE1(2811 router)------->PE1(2811 router)----------->P(3750 switch)--------->PE2(2811 cisco router)-------->CE2(2811 cisco router)If i am using the above senario on ...

I have an issue with a network I have in Rome where I need to track the port status up an uplink to determine if I need to change the routing path. I can't run OSPF with the neighbor (well I could, but they won't let me) so I have to implement someth...

Hi All,hope you can help  I have a 20 site network and need them all connected. The main office in london holds all servers. all sites need local internet breakout and all need to access the main site and maybe some internet site connections.Would th...

Hello everyone, We'er thinking of deploying a getvpn on a military network over a carrier vendor VPLS cloud. My concern is that can the route updates, hello packets, etc in EIGRP be encrypted so that the carrier can not see our network information? T...

I am slowly acquiring a home lab of Cisco devices. I am currently studying for the CCENT, so Packet Tracer is working fine. But, I would like to have a few Cisco devices by the time I pass and start studying for the CCNA - Routing and Switching. I wi...

Hello,We have a Cisco 2811 running IOS version 15.0M(1).  We have been noticing multiple input, frame, overrun errors on the multilink interface but none on the two serial interfaces.  I'll display some commands I issued below.  Can you tell me if th...

Hi everyone, I have 4 ADSL line that i want to use with the 2911 ISR router. i guess i should have 4 HWIC ports for that. i've never configure ADSL connection so did someone have an idea about the configuration? is there anything than i should pay at...

Cisco T1 DSU/CSU WAN Interface Card (WIC-1DSU-T1-V2) will it work with a Cisco 2800 series router?

Hi All, What causes high memory utilisation on a 1921 CPU? What pool of memory does the CPU use? Thanks