Routing

        hh

Hi friends,When ever we have commissioned a new physical WAN link we will be assured that for example, a bandwidth of 100Mbps from an ISP. How do we test the link wether it is capable of passing a traffic of 100Mbps other than putting a load on the l...

Does anybody have a recommendation on which order to learn BGP attributes? Like what is the most common attribute to the least common? If I wanted to start learning these in a lab environment which path should I take on which attributes to lab first?...

Besides a route map, what other way can you prevent a BGP neighbor from placing a certain route into its route table that its neighbor is advertising?                  

Please help on answers for below mentioned questions1.Can we redistribute BGP into IGP?2.Does it require that BGP router-id should reachable in cloud?3.If a static route is advertised in BGP without using update source what will be the next hop addre...

We have a 3845 router at one of our remote sites.  We want to connect the router to our central office using the two gigabit ports.  One link would be the primary and the other would be the secondary (backup).  The router is running EIGRP and the two...

What happens to my existing license if I was running 12.x (IP Services) and upgraded to 15.x (Univarsal)?  Do I need to purchase a new license to get the "IP Services" equivlant in 15.x or will it be migrated into the "Univarsal" image?

I have a customer where we are planning on using a 3925 to transport 3 VLANs across the WAN to the DR location.  We are going to be using L2TPv3 in order to do this.  When I configure the subinterface on the 3925 WITHOUT the xconnect, we have no issu...

Hello everyone, this is my first post so sorry if I posted in the wrong area, but here is a little info on my situation:I have (3) 2811 connected via frame relay switch (3745). The 3745 has (3) VWIC-2MFT-T1'sHQ 2811 has (1) VWIC2-2MFT-T1/E1Branch1 28...

Hello AllI would be grateful if someone could please provide some information on the following:I am trying to troubleshoot dropped packets issues over a Serial link using ppp multilink;one issue i am seeing which seems strange is that althought the S...