Routing

Hello,have been trying to find the answer but couldn't.does anybody have document or a link with atm debug interpretation? for example i need to understand what:ATM0: AAL5 rx errors (status = 2C030000)andatmsar_fastsend(ATM0): QUEUE_PER_VC enqueue fa...

Hi All I have got 3 router A-->B--->C , I need to establish ebg neigbor between router A( RID :10.10.10.1 AS 64512) -->C ( RD :172.16.1.2 AS 65102 ) connectionrtr A to rtr B ----> int fast 0/0 to int fast 0/0 ( 10.10.10.0/30)rtr B to rtc -----> int f...

Dear allI don't think,there is  a fix TTL value in every packet, i want to know, how ttl is managed in internet connection, wherethe packet has to traverse across thousands of hops, please can u help me to avoid this confusion?and what are the factor...

Hi,We have 3560G-48's running at remote DataCentres(Connecting to 7200's via PortChan) - We interconnect to clients in these remote DC's via eth. At one DC, the 3560 is getting close to running out of ports(~8 remaining) - Simplest solution is for us...

Dear All：       Our company has a Cisco 3600 with NM-2CE1U，and Cisco 2600 with WIC-1T.There is a connecting problem below：1.Serial2/1:1 is reset, line protocol is down2.E1 2/1 is downHow do I slove these two problems?3600#show interfaces serial 2/1:1...

helloi am useing cisco 1841i want to create client vpn to my cisco 1841 routecan you please send me instructions and how can i check if my router version support client vpngolan

Hello CSC,I am looking for configuration assistanceDHCP is configured for guest-SSId on WLC.DHCP range 192.168.1.10 - 50How do I forward all traffic with source 192.168.1.0.24 to proxy Server.How do I forward the return traffic back to WLCproxy IP : ...

Hi folks,My understanding is that T1 (US) use RJ-48 connector.How about E1's? Is that RJ-48 or typically you see RJ45C  or RJ45 by any chance?

Hi AllAny one know what this error could mean? when trying to place another service policy inside another policy ( Nested policy ) using MQC.CBWFQ : Error! shape pointer NULLCheers

Hello everyone,I cannot get wccp to work on my cisco router. I was wondering if someone could check my config and debug information and let me know what's going on.Here is my configurations:ip wccp web-cache!interface FastEthernet0/0 description Inte...

I have a customer that we sold them a 10 Meg point to point ethernet circuit. We had them on a circuit that included several hops on a 15454 and a couple 3560's that we were policing at 10 meg . We cut them to the 7609 we are policing at 10 meg and d...

Have you ever seen such a thing?(2) 3750 switches, stackwise configuration.After a power outage, the second switch is no longer providing PoE on its ports.