Routing

Hi,We have around 8 branches connected over MPLS VPN(from service provider).We are routing voip traffic and web related traffic over this cloud and my call manger and other web application are hosted at one my main hub.The strange thing is we are fac...

Hi,The current set up is two internet routers with ebgp connection to two different service providers and learning full internet routes. And we would like to make use of both the links and load share traffic.Can someone share a working configuration ...

Topology is as follows.Informacast server --> 3750-->2811-->MPLS-->2811-->3750-->iphoneI have configured ip pim sparse-dense-mode on all interfaces along this path.  One item that may be a problem is that the 3750's have the c3750e-universal-mz.122-5...

All,     I have an issue with my 2851 route and PIX515e.  Remote users are unable to access our member servers but are able to access the Domain controllers.  I have included our config files for both the PIX and 2851 router.  This address is resolvi...

I have Cat 3560-E switch the I'm upgrading from the twingig ports to the 10gig ports. When the switch boots up the ports go into err-disable. I haven't had much luck finding any docx on this.  I don't have the fiber to connect it up yet so I'm wonder...

Hi guys,Thanks for all the help thus far and I am nearing completion of my project.  I have one last piece to finish.I hooked the asa to a wan port, got my routing set and I am havng this problem.1. With NAT enabled on that wan port of the router, I ...

HiI am testing these new ISR G2 routers but now my problem is, on the ISR G2 I don't get the option to set up the protocol to PPPoE under the vpdn group name configuration instead there's only protocol l2tp. Previously I have tested an 877W for PPPoE...

Hi guys,I need to upgrade image in ASR 1006 from asr1000rp1-advipservicesk9.02.01.01.122-33.XNA1.bin to asr1000rp1-advipservicesk9.02.02.03.122-33.XNB3.bin to support PBR. Since the impect of any failure is huge.. need expert suggestion to complete t...

Is there anyway to have a V35 connectivity between equipments that is more than 32 feet distance?Each Cisco CAB-SS-V35MT is only 10 feet long; with one end as IAD serial port, and the other end as V35.Even if we interlink the each CAB-V35MT and each ...

sir we have to internet connectivity and each ip address segment from  from each isp. to acces our internal server we are giving static nat IP in both the segment so that if one link goes down the client can access through anothe link.we need to chan...

Hello,I'm having a problem which I don't know how to fix... if you can help  it will be useful for my training to CCNP and further CCIE.Here is the topology:Baseline: R3640veu is running two OSPF processes (100 and 200). As you can see pid 100 is ABR...

Hi ,We are keep getting the following error on our Cisco 6509-E VSL pair.We have replaced SUP720 and also few moudles, but the error is still appering once or  twice a day. We do have outage on our network due to high cpu on VSL pair.Any idea?Regards...