Routing

Dear All,I am facing a problem i.e, my all Network Computers traffic, Microsoft Exchange traffic, VPN traffic goes through one link,I have a pool of live IP addresses with a mask of /29some of my computers have virus and they broadcast to port 25 (sm...

In a lab enviroment I was experimenting with acl's and inspections. I could ping a destination with no problem but when trying to use traceroute to the same destination it would fail. Access list I was using was          access-list 101 permit icmp a...

Router(config)#int atm0/0/0.608Router(config-subif)#pvc 1/608% Incomplete command. Router(config-subif)#pvc 1/608 ?% Unrecognized commandCisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 12.4(13a), RELEASE SOFTWARE (fc1)

Hello everybody,I have a strange situation, please explain me why it happend From BGP peer I have recieved 4 prefixes:2 prefixes x.x.x.x/16 and two prefexis with /24.about the first two prefexis (/16) everything fine.i can see it via: sh ip bgp a.a.a...

Dear all, Customer (CE) public AS 23xxx is peered with private AS (PE) 65xxx. And private AS 65xxx is peering with Public AS 40xx for Internet. I have removed private AS from the AS 40xx further connected Internet peers. But I can see the private...

Hello Everyone,I have a router that is a stub, it's a 7200 series (old model) that is connected to another router (which is acting like it's gateway) model 7300 series.There connection between both routers is a POS, and everything is working fine.Whe...

I have a 7206 router configured with ingress sub-interfaces.  I need only one of the two networks, including loopback that associated with it, to be included in BGP routing process.  In other words, I want to exclude one loopback ip address ( loopbac...

Hello,Does I/O Controller mandatory for CISCO 3745 like in the CISCO 7200s or ..?Thank you,Uttam

Hi All,Could someone please help me, I have a router connected to a BT (British Telecoms) LES circuit via interface Gig0/0/0. The problem I'm having is when I do show cdp neighbour it shows itself and not the switch on the other end. Local router is ...

We've just bought a new Cisco 857w router, Have got the ADSL woring fine and the wireless working, what we wish to do is have a second wireless network for guests, i know this router can do this, my problem is i can only get one of the SSID's to Broa...

1.I have two switches connected together with two cables,Switch A is the root bridge for my vlan 2 traffic,so both ports are in designated fowarding. I want my traffic to preffer one of the port over the other, so I reduced the priority for vlan 2 on...