Routing

I need to design a failover for a voice network in a hosted voip solution environment. Basically we have two networks living in our environment, 172.16.2.0 for data and 172.16.10.0 for voice. Voice and data route to thru MPLS network via BGP on a T1....

eigrp hop is 224 , why it is 224? because igrp hop count is 255.

I looked at the spec sheet but couldent find the CPU or system bus specs for the 1841.

Hello,I have two T1 links from a remote office, one goes to the data center the other goes to our HQ office. Currently the default path is to use the T1 that goes to the data center. This is the correct behavior. I would like to have some traffic ...

hi, i have configured DMZ zone in my ASA 5550 version 7.1(2). The configuration for DMZ is as follow.access-list outside_int extended permit tcp any host XX.XX.XX.9 eq ftpstatic (inside,DMZ) 30.30.30.0 30.30.30.0 netmask 255.255.255.252 static (DMZ,o...

Hey guy's just curious for some advice on favorite methods for calculating WAN voice and application bandwidth requirements over a T-1. For example:You need to come up with the bandwidth reqiurements for VoIP and a high priority application for imple...

Dear Sir, I have a query on video/data traffic. I have a head office and two branch office .The two branch offices were connected to head office through leased line. In branch office we are having CC cameras (not Cisco), for monitoring ...

I am trying to determine which technology to go with so I am trying to determine if there is any significant overhead associated with MLPPP or any other benefits to a Fractional DS3 circuit.

Running 12.4(20) T on 2811 router. Successful DROP on matched PROTOCOL bittorrent and edonkey but not gnutella.class-map match-any Crap match protocol bittorrent match protocol edonkey match protocol fasttrack match protocol gnutella!!policy-map drop...

How can I block Lime wire on my router 2800 I tried build in feature through SDM but limewire still works. I even tried to block port 6346-47. no luck,,,,,,,Please help.

I am sending 192.168.254.0/24 route to R1 using route-map from R2. I dont understand why R1 is seeing the route via it ethernet0/0 after changing the ip ospf cost on the ethernet 0/0 to 10000. even after changing the BW on ethernet lower than the ser...

Hi, with 3750 switch a two 2960 switches are connected. in VTP configuration I have done 3750 as server and one 2960 as client and another one as transparent. But in all switches the version is showing 2. still I am geting the log given here "Sep 15 ...

Consider the scenario:CE1------CE2------PE1----PE2-----CE3---CE4CE2 and PE1, PE2 and CE3 have eBGP sessionCE1 and CE2, CE3 and CE4 have EIGRP sessionOn CE2 and CE3 there is a mutual red between EIGRP and BGP. If we inject route X from CE1 it reaches ...

Dear sir,The fallowing is possible on router1. Every router is configured to be a part of any network, that is, a group of profiles are created in the router and router assumes the configuration depending on the network properties.2. Every group/ pro...