Hi,Can we configure HSRP in single router connected to Two l2 switches thro FA port.I need to monitor These two FA ports if one goes down another should come up and vice versa.
I have ethernet link from my two ISP and need to track both the ISP through Track command in HSRP configuration i need if i can track the reachability of any site via applying any rout map or something else and track it in my HSRP config.Please assis...
gusy can someone please tell me rules to rem while configuring ospf on NBMA (FR).can someone please explain DR and 2way on FR. Secondly if we dont config any opsf type on FR........will it be bradcast or non broadcast.....and how to change it.....jus...
hi every body! 1)Do we need to configure the " interface range fastethernet 0/1, fast ethernet 0/2" first before we can use the command"defineinterface-range zee fastethernet 0/1, fastethernet 0/2" ?2) switch puts ports in errdisable for different er...
Hi im a newbie in networking and im doing self study. my problem is i can't connect through Telnet because of this problem. i copy and paste it in command prompt and tera term. thank you.command promptC:\>telnet 67.177.164.2Connecting To 67.177.164.2...
Hello folks - We have a couple of branch sites that are connected to the corporate through an MPLS cloud. If I want to measure the WAN utilization on each one of the T1 circuits from these branch locations, what is the best way to do this?Thanks for ...
I am having a heck of a time figuring out what to do to MUX 2-t1's together between a 2600 and a 6500 with an ATM backbone. From what I can tell, the 6500 can't do the multilink but the 2600's can??? This is ALL I have configured so far on the 2600...
Hi, i have host connected to port on my swtiched network, please let me know on which and which post the host is connected Host ip:10.1.89.50 1 step: core720#p 10.1.89.50(host IP) Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1....
I have a cisco 10008 router which aggregiates (is a gateway for) leased line customers (ppp connection). They complain that they couldn't establish any kind of vpn. How can I debug this stuff?
