Routing

Hi, I need to tag or mark different types of traffic for priority or QoS, (i attach my Scheme) i need three types of Tags that i already have configured in both switchs and the access point, Tag "63" for voice, Tag "26" for Signalling and Tag "0" for...

I want to put a router in my house should i go with the 851w or the 2620XM????? thanks =) or any other suggestions

I have a 7206vxr router with a PA-A3 ATM interface connected by optic fibre to a LS1010 ATM switch. I am getting condsiderable CRC errors on the router interface (receive side), 1000's per hour. We changed the interface on the router, it made no diff...

i'm configuring my router 2800 series (ver 12.4 3g)) and it doesn't have IP Receive ACL feature. How do i get it?Thanks,hoan

I've experience 99% interrupts on mine 2811 when using nat on 100Mbit link and usually it's not getting more than 45Mbit. Without NAT, cpu load not more than 3%. That's quite surprising me because 1801 at my other site can handle 100Mbit just fine wi...

Dear AllBelow is the script, I am using for internet connectivity on 1841 router.The same scripts works fine at one place but dosent work on clients side.Paragon> Paragon>en Paragon#sh runn Paragon#sh running-config ...

Hi Guys,We try to configured a x25 routing from one XOT session to another XOT session.--We do not succeed in making it working.--- The X25 routing from a X25 interface to a XOT session is workign fine- the X25 routing from a XOT session to a X25 int...

Hi Please see the post "Basic Routing Problem" in this forum here is the link http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&topicID=.ee71a06&fromOutline=&CommCmd=MB%...

Dear Sir,We have Vsat Connectivity to all the remote locations .we have a hub Spoke Architecture .The users at remot e site are facing problem to access SAp appliations .We have tried with juniper WXc ,Can WAAS help me to acelerate the traffic .Tha...

Hi I've been trying to find the next compatible Network Module to replace the NM-16A/S installed on our 3845 series router. THe above module do data transmition rate of up to 128Kbps on syn/async links according to the Cisco site. What would be the n...

I have a simple applet that I am using to monitor the status of the a serial link...if the link goes down the applet brings up another interface that allows for a vpn connection...I am trying to setup some timer that will only bring up the interface ...

Please advice!!!!!I have two VLAN's in the switch. Vlan 1: 10.10.10.0/24; Vlan 2: 20.20.20.0/24. The proxy server in Vlan1, which is 10.10.10.10I would like to do:1- VLAN2 running DHCP in the switch. VLAN2 should be access to the DHCP server.2- VLAN2...

Hello,I got an 1841 router and installed a VWIC2-1MFT-T1/E1 card for our incoming PRI. I got the card setup for a T1 but when I try to do the pri-group config I get the following error:%Please configure network-clock-participate wic 0 first%Insuffic...