Routing

from 10.209.19.234 next hop 10.209.19.235 to 10.209.19.51 can ping.from 10.209.19.234 next hop 10.209.19.235 to 10.209.19.65 cannot ping, why?pls. see attachment drawing ....thanks!

Hi,I've set up a Cisco 1601 router (yes, I know it's outdated, but no use purchasing a new one if this one is doing the job), the WAN interface is serial link to a Network Terminating Unit which establishes the company internet connection.The setup i...

Hi, I have a new Cisco 877 K9 v02 Router. Can anyone please advise if this is Annex M compatible with ADSL2+? If it is not are there any suggestions for recommended course of action to gain compatibility? Cheers Cameron

Hi,i have problem of CPU utilization picks up on the one end router. And while i see ip accounting there seems lots of traffic flowing between the source router and remote end router public IPs. I tried to add ACL for denying IP Traffic between those...

I am trying to recover a password on a PIX 515e. I set the interface address, gateway address, server address, and cannot ping the server, cannot see it on the network, etc. I am at a loss. I've never had this problem before.

Hi Everyone, I want to have two sites connected by an ipsec VPN tunnel. At site1, I am using a 10.1.0.0 subnet, and at site2, I am using a 10.2.0.0 subnet. We use static routes (management chosen), so I wanted to ask if I needed to make a network ...

Hello,I want to setup a source route for one server to go across a specific link (not the default gateway). For example, the server IP is 10.3.15.21 and the network I want to get to is 10.2.24.0. This network is two hops away be default. But I wan...

Hi,I've got a scenario where my users will be on 1.1.1.0/24 and my router ip address is 1.1.1.3/24. I have two servers connected to the router. The FTP server is 192.168.1.1 and the Streaming server is 192.168.1.2. If the user is going to transfer a ...

I thought when BGP either up or down, it would start the counter. Today, the result showed "never". I am just curious about it.Is that mean the counter never able to start?Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/Pf...

Any body can help me with this?I haven't experience in this

Our network is divided into two parts (each part is managed separately). Long ago we decided to merge our routing protocols using OSPF. Our side has seen some issues with OSPF because of its inability to load balance the way we want. For example: we ...

Hi,we have some strange situation. According to the documentation the GRE traffic on SUP720 should be processed in CEF mode. But If I look onto our graps I can clearly see that there is a dependency between amount of GRE traffic and management CPU l...

While running a basic ping to data center site, i get full pings not delays,Ping 192.168.10.10Reply from 192.168.10.10: bytes=32 time=35ms Reply from 192.168.10.10: bytes=32 time=35ms however when i run a traceroute, i get request timeouts but the ne...

Hi,I am having a problem with a TCP session staying open on a server. The session is a FIX (Financial Infomation Exchange) session. Here is a synopsis of the problem.We connect to a order routing service via BT Radianz, they NAT our internal privat...