Routing

Dear I have drop in the backet when I ping why, what is the mean resone in the drop I check the physical I change the cable I change the switches.

Hi,The details provided are 10 Mbps metro ethernet link.How to calculate the link utilization ??FastEthernet0/1 is up, line protocol is up Hardware is Gt96k FE, address is 000e.83fe.1a91 (bia 000e.83fe.1a91) Description: ****** AP-Circle to Sanath ...

Hi,We are not able to download files from an external/public FTP server. The following abreviated config from our Cisco 2621 perimeter router. Any suggestions would be appreciated.Thanks. Saidmemory-size iomem 25ip inspect max-incomplete high 1100i...

Hai all, My customer is facing a issue in load balancing OSPF in Multilink (Point to Point ) after configuring the multilink customer is only able to use 60 % of the bandwidth. Now customer has removed the multilink but still he is not able to load b...

I have a WS-C3548-XL-EN switch with a bad gigabit port and am having troubles determining if it is on a lifetime warranty (I'd like to get it replaced if I can).From what I gather it was put on EoS/EoL back in July 2002, and the limited lifetime warr...

Dear All,ist it possible to get hsrp working between a 2600 IOS 12.3 and a 1700 IOS 12.1?I am trying to build some redundnacy into a very badly designed network.Any suggestion received with thanks.Nathan.

Hi Experts,we have recieved the following logs on our WAN router yesterday and faced a loss of connectivity for some time.Nov 28 13:48:24.124: %BGP-5-ADJCHANGE: neighbor 10.63.161.14 Down Interface flapNov 28 13:48:25.124: %LINEPROTO-5-UPDOWN: Line p...

Hi, I can connect to my ISP (Telia, Sweden), but I don't get a ip from my ISP. I think that the router cant't receive any DNS... Telia use dynamic DHCP and DNS. I have set the encapsulation mode to "RFC 1483 llc/snap"

Hi,My router A is connected to 2 upstream routers,as below,1-Router A---fa0/0---R12-Router A---Fa0/1---R2All 3 routers running OSPF , I would like Router A to prefer 1st link over 2nd link.does puting the lower cost on 1st link interface will do the ...

I have a cisco 2811 without DSPs and I have installed 4 VWIC-2MFT-E1. At the moment I want to configure the E1s I can't because the VWICs are not recognized by the router, it displays a message that it requires DSPs, but actually I want to configure ...

Imagine between my data center and a security guard facility 500 yards away, I need to provide an ethernet drop.The undergroud/conduit intermediate vaults are dirty, susceptible to humidity. I have no power available there (other than the PoE provide...

Hi,This is one of the interesting issue which i am facing. Whenever my client tries to send a file less than 1kb, the file is transmitted successfully over ftp, but for files greater than 1kb, the files are not being transferred, instead a 0 kb file ...

Hai frenz, may be an easy question to you all but i have doubt ...pls do help me1.why do we need AS Number, 2.in what situation AS number is needed?? 3.if my customer using AS do i also need to have AS to talk to his router4.if i dont have AS .. can ...

Hi all,I believe that rmon is configured on our CatOs switches.In order to see/use the RMON data from our FLUKE device which is a different monitoring device, we need to know the RMON READ and the RMON READ/Write community string.Can you please let m...